ROTA-S plus 2.0 160-42 C5-SFG
3-jaw manual chuck with jaw quick-change system
ID 819021
Standard manual lathe chucks
Product features:
Product features:
- 3-jaw wedge-bar chuck
- Jaw quick-change system
- Through-hole: 42 mm
- Spindle holder: ISO 702-3 Nr. 5
- Jaw interface: Angled serration
- Stroke per jaw: 6.5 mm
- Tooth pitch: 4.8 mm
- Max. clamping force: 65 kN
- Max. torque: 80 Nm
- Max. RPM: 5400 1/min
- Weight: 9.6 kg
Technical data
Spindle type | ISO 702-3 |
---|---|
Spindle size | Nr. 5 |
Serration | Angled serration |
Max. RPM [1/min] | 5400 |
Max. clamping force [kN] | 65 |
Max. torque [Nm] | 80 |
Stroke/jaw [mm] | 6.5 |
Tooth pitch [mm] | 4.8 |
Height H with adapter plate [mm] | 79.5 |
Weight [kg] | 9.6 |
Clamping force-RPM-diagram
Clamping force-RPM-diagram
- X Axis:
- n [min-1]
- Y Axis:
- Fsp [kN]
- brown
-
SHF 160
- red
-
STF 160
- yellow
-
SFA 160
- green
-
Required minimum clamping force Fspmin 33%
General notes about the series
Definition clamping force
The clamping force is the arithmetic sum of the individual forces occuring at the chuck jaws, distance “H“ at maximum pressure and maximum torque. The specifications exclusively refer to the grease used by SCHUNK.
Scope of delivery
Chuck, 1 set of base jaws with screws, chuck mounting bolts, actuation key and operating manual