CTS B-100-MM
ID 1459339
Technical details
| Variant | Passive |
|---|---|
| Recommended CPS size | 020, 021, 029, 040, 041, 046, 060, 071, 076 |
| Recommended CPB size | 063, 080, 100 |
| max. load capacity [kg] | 100.0 |
| Installation position | horizontal |
| Tool presence monitoring | optional |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 60.0 |
| Weight [kg] | 0.25 |
| Moment load Mx [Nm] | 100.0 |
| Moment load My [Nm] | 100.0 |
Dimensions and maximum loads
Center of gravity position of tool, passive variant
Dimensions and maximum loads
This is the max. sum of all static loads that are permitted to act on the storage system to ensure error-free functioning.
Center of gravity position of tool, passive variant
For the passive variant, the center of gravity of the tool must be within the permissible range according to the diagram. In addition, the occurring moments must not exceed the permissible values.
- Gruene Flaeche
- Permitted range
- Rote Flaeche
- Inadmissible range
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.