KOM HSK-A 63 Ø22x100
Combination shell and end mill adapters
ID 23000078
KOM HSK-A 63 Ø22x100, Toolholders
- Combination shell and end mill adapters
- Series: Combination shell and end mill adapters
- Toolholder interface: HSK-A 63
- Clamping diameter: 22 mm
- Thread in clamping diameter: M10
- Projecting length: 100 mm
- Run-out accuracy: ≤ 0.006 mm measured from taper to D1
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Technical details
| Technologie | Kombi-Fräser-Aufsteckdorne |
|---|---|
| Baureihe | Kombi-Fräser-Aufsteckdorne |
| Werkzeughalterschnittstelle | HSK-A 63 |
| Werkzeughalternorm | DIN ISO 12164-1 |
| Spanndurchmesser D1 | 22 mm |
| Gewinde Anzugsschraube G | M10 |
| D2 [mm] | 40.0 |
| Auskraglänge L1 [mm] / [inch] | 100 mm / 3.9" |
| L4 [mm] | 74.0 |
| L11 [mm] | 31.0 |
| L12 [mm] | 19.0 |
| Gewicht [kg] | 1.45 |
| Kühlmitteldicht | ja |
型号
用于安装带纵向或横向槽的刀具
回转精度
从锥体到 D1 测量 ≤ 0.006 mm
平衡等级
转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
RAM 数据采集器
符合 DIN 69873 规定的钻孔用于安装数据芯片
刀柄更换
对于自动更换刀柄
标配范围
包括拧紧螺栓、传动环和导向键
单独
可按照客户要求，提供其他尺寸和订制设计