B 100-ZSS-40AT10-200
- 最大ストローク: 7420 mm
- 駆動ジョン: 40 AT 10
- 最大駆動力: 2800 N
技術的詳細
| 最大ストローク H [mm] | 7420.0 |
|---|---|
| 最大駆動力 [N] | 2800.0 |
| 繰り返し精度 [mm] | ± 0.08 |
| 最大全長 [mm] | 7900.0 |
| 最大速度 [m/s] | 5.0 |
| 最大加速度 [m/s²] | 40.0 |
| 最低周囲温度 [°C] | 0.0 |
| 最高周囲温度 [°C] | 80.0 |
| 基礎台自重、スライダー含む [kg] | 9.1 |
| 100mm のストロークごとの付加質量 [kg] | 1.45 |
| スライダーの重量 [kg] | 3.8 |
| スライド板長さ [mm] | 280.0 |
| ガイドシステム | レールガイド |
| レールの数 | 1.0 |
| レールのサイズ | 20 |
| 駆動方式 | ベルト駆動 |
| アイドルトルク [Nm] | 2.5 |
| 慣性モーメント [kgm²] | 0.0126 |
| 歯付きベルト式 | 40 AT 10 |
| 1 回転あたりの移動距離 [mm] | 200.0 |
| 長さ X [mm] | 480.0 |
| 幅 Y [mm] | 100.0 |
| 高さ Z [mm] | 105.0 |
| モーメント Mx 最大 [Nm] | 200.0 |
| トルク My 最大 [Nm] | 300.0 |
| モーメント Mz最大 [Nm] | 300.0 |
| 力 Fy 最大 [N] | 1000.0 |
| 力 Fz 最大 [N] | 3000.0 |
| 力 -Fz max. [N] | 2000.0 |
SCHUNKのノイズダンピング（SAG）付き標準スピンドルサポートは、2 SAG ごとに最大ストロークを 10 mm 短縮します。
なお、スピンドル軸の慣性モーメントは1mです。
Dimensions and maximum loads
Max. driving force (toothed belt)*
Dimensions and maximum loads
The indicated forces and moments are maximum values for individual loading. If several forces and/or moments are applied at the same time, the maximum permitted individual values will be lower.
Max. driving force (toothed belt)*
- X 軸:
- Speed
- Y 軸:
- Driving force
General notes about the series
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Max. stroke
is the maximum permissible stroke. Acceleration and braking distances or possible overrun must be taken into consideration.
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Acceleration and speed
The values specified are the maximum values of the units without loading. The actual accelerations and speeds for your application must be designed separately and can deviate from the maximum values.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Operating principle
Choice of toothed belt or ball screw spindle drive
Drive
servomotors of different providers can be trouble-free adapted
Profile
Extruded aluminum profile with plastic cover strip
Slide
Aluminum slide with a brush seal
Scope of delivery
Assembly and operating manual with declaration of incorporation
Warranty
24 months