GM 100-S
ID 313070
- Stroke per jaw: 4 mm
- Opening force: 410 N
- Max. ambient temperature: 60 °C
技術的詳細
| Stroke per jaw [mm] | 4.0 |
|---|---|
| Opening force [N] | 410.0 |
| Min. spring force [N] | 110.0 |
| Weight [kg] | 0.62 |
| Recommended workpiece weight [kg] | 1.5 |
| Cylinder volume per double stroke [cm³] | 9.78 |
| Min. operating pressure [bar] | 4.5 |
| Max. operating pressure [bar] | 8.0 |
| Nominal operating pressure [bar] | 6.0 |
| Closing time [s] | 0.04 |
| Opening time [s] | 0.025 |
| Max. permissible finger length [mm] | 70.0 |
| Max. permissible weight per finger [kg] | 0.2 |
| IP protection class | 40 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 60.0 |
| Repeat accuracy [mm] | 0.02 |
| Moment Mx max. [Nm] | 14.0 |
| Moment My max. [Nm] | 8.0 |
| Moment Mz max. [Nm] | 14.0 |
| Max. axial force Fz max. [N] | 210.0 |
Max. loads
Gripping force
Max. loads
The indicated moments and forces are statical values, apply for each base jaw and may appear simultaneously. Loads may additionally occur to the moment produced by the gripping force itself.
Gripping force
- X 軸:
- Point P - Finger length
- Y 軸:
- Gripping force
モデルシリーズに関する一般注意事項
把持力
は、距離 P で各ジョーにかかる個別の力の算術合計です (図を参照)。
フィンガー長
距離 P の地点の基準面から主軸の方向に測定します。 フィンガーの許容最大長さは公称作動圧力到達までに限って適用されます。それ以上の圧力においては、フィンガー長さを公称作動圧力に比例して低下させる必要があります。
繰り返し精度
連続 100 回のストロークでの停止位置のばらつきを示します。
ワーク重量
圧着接合では、静止摩擦係数 0.1 と重力加速度 g におけるワークの滑り落ちに対する安全係数 2 にて計算します。形状接合と型締クランピングについては、許容可能なワークピース重量は著しく高まります。
閉 / 開回数
は、アプリケーション固有のグリッパーフィンガーを含まない、ベースジョーのみの移動時間です。バルブ開閉時間、ホース充填時間、または PLC 応答時間は含まれません。サイクルタイム計算の際は、注意してください。
作動方式
内側のウェッジフックの動的性能
ハウジングの材質
特殊ハードコート処理されたアルミ合金
ベースジョーの材質
鋼鉄
ガイド
円形ガイド、研磨・焼入れ
作動
空圧式、フィルターを通した圧縮空気、ISO 8573-1:2010 [7:4:4] に準拠。
保証
24 カ月
納品内容
近接スイッチ用ブラケットや近接スイッチがなくても作動可能
把持力の維持
Ohne zusätzliche Störkontur in den Standardgreifer integrierbar