arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
国の選択を変更して、お住まいの地域に関連する製品、サービス、および担当者に関する情報を表示します。
EZU 30-EI-N-SD 유사 그림

EZU 30-EI-N-SD

중앙 그리퍼

ID 1582007

중앙 그리퍼 EZU, 크기: 30, 전동식, 방진 버전의, 통신 인터페이스: EtherNet/IP

  • 죠당 스트로크: 20 mm
  • 최소 파지력: 210 N
  • 최대 파지력: 350 N
  • 전원공급장치: 24 V
  • 최대 주위 온도: 55 °C
죠당 스트로크 [mm] 20.0
최소 파지력 [N] 210.0
최대 파지력 [N] 350.0
최대 허용 가능 핑거 길이 [mm] 80.0
핑거당 최대 허용 무게 [kg] 0.4
반복 정밀도(그리핑) [mm] 0.02
반복 정밀도(위치 결정, 한방향) [mm] 0.05
반복 정밀도(위치 결정, 양방향) [mm] 0.15
폐쇄 시간 [s] 0.6
개방 시간 [s] 0.6
최대 속도(위치 결정) [mm/s] 40.0
최대 가속도 [mm/s²] 150.0
중량 [kg] 2.3
최소 주위 온도 [°C] 5.0
최대 주위 온도 [°C] 55.0
IP 보호 등급, 전자 장치 67
IP 보호 등급, 가이드/베이스 죠 64
클린룸 클래스 ISO 14644-1 4
청정실 등급: ISO 14644-1 2015
정격 전압 [V] 24.0
통신 인터페이스 EtherNet/IP
BasicGrip 공칭 전류 소비 [A] 0.14
BasicGrip 최대 전류 소비 [A] 0.67
논리 공칭 전류 소비 [A] 0.16
논리 최대 전류 소비 [A] 0.2
모멘트 Mx 최대 [Nm] 32.0
모멘트 My 최대 [Nm] 35.0
모멘트 Mz 최대 [Nm] 32.0
최대 축 포스 Fz 최대 [N] 800.0
방진 버전 예

General notes about the series

Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).

Repeat accuracy (gripping)
defined as the spread of the actual position per jaw during 100 consecutive closing or opening movements on a rigid workpiece or a fixed stop under constant conditions.

Repeat accuracy (positioning, unidirectional)
defined as the spread of the actual position per base jaw during 100 consecutive movements to a target position from the same direction under constant conditions.

Repeat accuracy (positioning, bi-directional)
defined as the distribution of the actual position per base jaw during 100 consecutive movements to a target position from both directions under constant conditions.

Finger length
is measured from the reference surface as the distance P in direction to the main axis.

Closing and opening times (positioning)
Closing and opening times are only the movement times of the fingers at max. speed, max. acceleration with observance of the maximum permissible masses per finger and refer to 50% of the available stroke per jaw in the basic version.

Max. speed (positioning) and max. acceleration
is the speed and acceleration acting on each jaw.

Housing material
Aluminum alloy, anodized

Base jaw material
Steel, corrosion-protected

Warranty
24 months or 5 million cycles BasicGrip / 3 million cycles StrongGrip (one cycle consists of a complete gripping process: "Open gripper" and "Close gripper")

Scope of delivery
Gripper including safety information and accessory kit with centering sleeves for gripper and finger mounting. Product-specific instructions and software can be downloaded at schunk.com/downloads-manuals and schunk.com/downloads-software.