CMS 100-K-B
ID 1545370
- Detección de la carrera del pistón: no posible
- Fuerza Fz máx.: 1800 N
- Carga útil total máx.: 43 kg
Información técnica
| Peso de la pieza recomendado [kg] | 43.0 |
|---|---|
| Detección de bloqueo | no posible |
| Precisión de repetición [mm] | 0.02 |
| Peso [kg] | 1.65 |
| Brida de conexión en el lado del robot | ISO 9409-1-100-6-M8 |
| Temperatura ambiente mín. [°C] | 5.0 |
| Temperatura ambiente máx. [°C] | 60.0 |
| Esquema de conexión de los tornillos | J |
| máx. fuerza de tensión estática Fz [N] | 1800.0 |
| Momento dinámico máx. Mx/My [Nm] | 230.0 |
| Momento dinámico máx. Mz [Nm] | 230.0 |
| Momento estático máx. Mx/My [Nm] | 500.0 |
| Momento estático máx. Mz [Nm] | 1185.0 |
Dimensions and maximum loads
Load diagram
Dimensions and maximum loads
This is the sum of all static loads that are permitted to act on the change system to ensure error-free functioning.
Load diagram
Maximum handling weight as a function of acceleration and lever arm (by Mx/My). The diagram does not replace the technical design.
- Eje X:
- Lever arm
- Eje Y:
- Weight
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
Manual via locking lever
Operating principle
The head and adapter are locked and unlocked with a pin by operating the manual lever.
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Warranty
24 months