KSH3 100-IM
ID 1467595
Vlastnosti produktu:
- 2čelisťový silový svěrák
- Středicí upínání
- Standardní zdvih
- Induktivní monitorování čelisti
- Základní čelisti: Jemné zoubkování a pero s drážkou
- Rozměry: 100 x 100 x 74,2 mm
- Upínací síla při max. provozním tlaku: 18 kN
- Zdvih na čelist: 2 mm
- Max. výška čelisti: 60 mm
- Opakovatelná přesnost: 0.01 mm
- Provozní tlak: 10 - 60 bar
- Spotřeba oleje / dvojitý zdvih: 30 cm³
- Zavírací/otevírací čas: 1 s
- Vlastní hmotnost: 5 kg
Technical details
| Stroke per jaw [mm] | 2.0 |
|---|---|
| Clamping force at max. operating pressure [kN] | 18.0 |
| Min. operating pressure [bar] | 10.0 |
| Max. operating pressure [bar] | 60.0 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 60.0 |
| Distance H [mm] | 16.0 |
| Oil consumption per double stroke [cm³] | 30.0 |
| Closing/opening time [s] | 1.0 |
| Weight [kg] | 5.0 |
Scope of delivery
Clamping force block, mounting screws, cover plugs, clamping sleeves, fitting screws, inductive proximity switch, connection cable, cover, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Inductive monitoring of clamping slide positions
Possibility to monitor two jaw positions between the end positions of the base jaws using proximity switches (e.g. "open" and "clamped").
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)