CWA-125-P
ID 305826
- No. of fluid feed-throughs: 4
- Force Fz max.: 1200 N
- Max. total payload: 28 kg
技术细节
| 建议搬运重量 [kg] | 28.0 |
|---|---|
| 重复精度 [mm] | 0.01 |
| 重量 [kg] | 0.125 |
| 气路连通数量 | 4.0 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 60.0 |
| 直接连接至* | PGN-plus 125 |
| 长度 X [mm] | 100.0 |
| 宽度 Y [mm] | 60.0 |
| 高度 Z [mm] | 10.0 |
| 力矩 Mx max. [Nm] | 110.0 |
| 力矩 My max. [Nm] | 160.0 |
| 力矩 Mz max. [Nm] | 200.0 |
| 力 Fz max. [N] | 1200.0 |
* 请注意更换主装置 (ZK) 和更换转接器 (ZA) 的高度有所不同。算数和代表已连接好的快换系统的总高度。
Dimensions and maximum loads
Dimensions and maximum loads
This is the max. sum of all forces and moments which are permitted to act on the change system for ensuring proper functioning.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
manually via Allen key, provided by the customer
Operating principle
by turning the threaded spindle, the clamping jaws are clamped or unclamped
Media transmission
Integrated pneumatic feed-through
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Scope of delivery
Centering sleeves for mounting and direct connection
Warranty
24 months