APS-Z80-M8
Analog position sensor
ID 302070
Analog position sensor APS-Z80, Size: 80
- Cable length: 0.3 m
- Sensor cables KA: M8 connector, 3-pin
- Nominal voltage: 24 V
Technical details
Measuring principle | inductive |
---|---|
Number of switching points | Analog |
Voltage output | yes |
Min. output voltage [V] | 0.5 |
Max. output voltage [V] | 9.5 |
Linearity [%] | ± 5 |
Repeat accuracy R of final value maximum | ±3% |
Limit frequency [Hz] | 1000 |
Min. ambient temperature [°C] | -10 |
Max. ambient temperature [°C] | 70 |
LED display in sensor | no |
Max. measuring speed [m/s] | 20 |
Response time/type. Switching time [ms] | 0.5 |
Nominal voltage [V] | 24 |
Min. operating voltage [V] | 15 |
Max. voltage [V] | 30 |
Max. ripple (% of Ue) | ±15% |
Type of voltage | DC |
Nominal current [mA] | 8 |
Min. load resistance RL [kΩ] | 2 |
Short circuit protection | yes |
Protected against polarity reversal | yes |
Housing material | Steel, rustproof |
Material of the active surface | PBT |
Cable connector/cable end | M8 connector, 3-pin |
Cable length [m] | 0.3 |
Cable diameter [mm] | 3.1 |
Cable sheath material | PUR |
IP protection class | 67 |
Protection class | 2 |
CE | yes |
The typical voltage value at the output ranges between 0.5 and 9.5 volts. Depending on the gripper and gripper size, the voltage value may be higher or lower.
The stated linearity value refers to the overall system consisting of gripper and sensor.
The stated linearity value refers to the overall system consisting of gripper and sensor.