AGE-S-Z-160-0
ID 324561
代替製品：
- 補正Z: 14 mm
- ワーク重量: 60 kg
- 力 Fz 最大: 800 N
- 力 Fd 最大: 2000 N
技術的詳細
| 補正Z [mm] | 14.0 |
|---|---|
| 推奨ハンドリング荷重、垂直方向 [kg] | 60.0 |
| 推奨ハンドリング荷重、水平方向 [kg] | 40.0 |
| ピストン力 Z [N] | 1900.0 |
| 最小スプリング力 [N] | 640.0 |
| 最低作動圧力 [bar] | 2.5 |
| 最大作動圧 [bar] | 8.0 |
| 呼び作動圧力 [bar] | 6.0 |
| 繰り返し精度 [mm] | 0.1 |
| ロボット側接続 | ISO 9409-1-160-6-M10 |
| ツール側接続 | ISO 9409-1-160-6-M10 |
| 重量 [kg] | 11.8 |
| 最低周囲温度 [°C] | 5.0 |
| 最高周囲温度 [°C] | 60.0 |
| 長さ X [mm] | 215.0 |
| 幅 Y [mm] | 200.0 |
| 高さ Z [mm] | 123.0 |
| モーメント Mx 最大 [Nm] | 200.0 |
| トルク My 最大 [Nm] | 200.0 |
| モーメント Mz最大 [Nm] | 100.0 |
| 力 Fz 最大 [N] | 800.0 |
| 最大力 Fd [N] | 2000.0 |
寸法と最大荷重
寸法と最大荷重
この値は、補正ユニットに作用させることができる全トルクおよび負荷 (加速に要する力およびトルク、プロセスに要する力など) の最大合計です。トラブルなく機能させるために遵守する必要があります。
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Guidance system
robust linear guidances
Monitoring
XY locking and unlocking via a magnetic switch and Z-stroke via inductive proximity switch
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months