WHI SCAPTO C6 Ø6x75
Whistle Notch mountings
ID 23003881
WHI SCAPTO C6 Ø6x75, Toolholders
- Whistle Notch mountings
- Series: Whistle Notch mountings
- Toolholder interface: SCHUNK CAPTO C6
- Clamping diameter: 6 mm
- Projecting length: 75 mm
- Run-out accuracy: ≤ 0.003 mm measured from taper to D1
- Balancing grade: G6.3 at 8,000 RPM or Umax < 1 gmm
Détails techniques
| Technology | Whistle Notch mountings |
|---|---|
| Series | Whistle Notch mountings |
| Toolholder interface | SCHUNK CAPTO C6 |
| Toolholder standard | ISO 26623-1 |
| Clamping diameter D1 | 6 mm |
| D2 [mm] | 25.0 |
| D6 [mm] | 14.5 |
| Projecting length L1 [mm]/[inch] | 75 mm / 3.0" |
| L2 [mm] | 36.5 |
| L3 [mm] | 10.0 |
| L4 [mm] | 50.5 |
| G | M5 |
| G1 | M6 |
| Weight [kg] | 0.995 |
| Coolant-proof | yes |
| Standard length | yes |
These product variants are suitable for both milling as well as turning centers
Modelo
Para herramientas de sujeción con vástagos cilíndricos conforme a DIN 1835E y DIN 6359HE.
Concentricidad
≤ 0,003 mm medido desde el cono hasta D1
Calidad de equilibrado
G6.3 a 8.000 rpm o Umáx < 1 gmm
Rosca G1
G1 = rosca para tornillo de apriete
Chips de datos
Taladros para portadoras de datos según DIN 69873
Cambios de portaherramientas
Para cambios automáticos de portaherramientas
Material suministrado
Incluye el tornillo de sujeción y el tornillo de ajuste longitudinal
Individual
Otros tamaños y versiones especiales disponibles previa consulta