ELP 100-H200-H1G
ID 1487978
- Course max.: 200 mm
- Force max. d'entraînement: 104 N
Détails techniques
| Concept d'entraînement | Entraînement direct linéaire |
|---|---|
| Course max. [mm] | 200.0 |
| Force nominale [N] | 104.0 |
| Couple maximal max. (horizontalement) [kg] | 6.0 |
| Couple maximal max. (verticalement) [kg] | 4.0 |
| Répétabilité [mm] | ± 0.01 |
| Poids propre, chariot inclus [kg] | 8.3 |
| Poids du chariot [kg] | 2.4 |
| Température ambiante mini. [°C] | 5.0 |
| Température ambiant maxi. [°C] | 55.0 |
| Indice de protection IP | 20 |
| Catégorie salle blanche ISO 14644-1:2015 | 5 |
| Emission de bruit [dB(A)] | 68 |
| Distance N (pour la charge de moment) [mm] | 299.0 |
| Longueur X [mm] | 454.0 |
| Largeur Y [mm] | 97.0 |
| Hauteur Z [mm] | 68.5 |
| Tension nominale [V] | 24.0 |
| Courant nominal [A] | 1.6 |
| Courant max. [A] | 5.9 |
| Electronique de commande | intégré(e) |
| Interface de communication | Entrées digitales |
| Nombre d'entrées digitales | 2.0 |
| Courant logique [A] | 0.06 |
| Moment Mx max. [Nm] | 83.0 |
| Moment My max. [Nm] | 107.0 |
| Moment Mz max. [Nm] | 107.0 |
| Force Fy max. [N] | 3880.0 |
| Force Fz max. [N] | 3880.0 |
| Force -Fz max. [N] | 3880.0 |
| Version avec graisse H1 | Oui |
Dimensions et charges max.
Temps de déplacement horizontal
Dimensions et charges max.
Les forces et les couples indiqués sont des valeurs maximales pour une charge individuelle. Si plusieurs forces et/ou couples sont appliqués simultanément, les valeurs individuelles maximales autorisées sont inférieures.
Temps de déplacement horizontal
- Axe X:
- niveau de vitesse
- Axe Y:
- temps de course
General notes about the series
Stroke
is the maximum nominal stroke of the unit. It can be reduced on both sides by end stops.
Repeat accuracy
is defined as a distribution of the end positions for 100 consecutive cycles.
Travel times
are pure movement times of the slide. PLC reaction times are not included and have to be considered when the cycle times are determined.
Payload
is the weight of the total weight which is attached to the cantilever arm. Please consider that service life will shorten if the maximum payload is exceeded. SCHUNK cannot assume any warranty for this.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Housing material
Aluminum alloy, coated
Guidance
Backlash-free, pre-loaded roller guides
Drive
Linear direct drive
Scope of delivery
Accessory kit with centering sleeves, safety information (product-specific instructions are available online)
Warranty
24 months
Service life characteristics
on request