SRH-plus 20-S-M8-A
ID 359446
- 流体通路数量: 4
- 输出端电气接口尺寸: M8
- 扭矩: 3 Nm
Détails techniques
| 旋转角度 [°] | 180 |
|---|---|
| 端位置调整 [°] | 3 |
| 扭矩 [Nm] | 3.0 |
| IP 防护等级 | 67 |
| 重量 [kg] | 2.2 |
| 流体消耗量（2×额定角度） [cm³] | 60.0 |
| 无有效负载的旋转时间 [s] | 0.4 |
| 额定工作压力 [bar] | 6.0 |
| 最小工作压力 [bar] | 3.0 |
| 最大工作压力 [bar] | 8.0 |
| 连接软管直径 | 6 x 3.9 x 1.05 |
| 流体通路数量 | 4.0 |
| 流体通道的最大压力 [bar] | 8.0 |
| 最低环境温度 [°C] | 5.0 |
| 最高环境温度 [°C] | 60.0 |
| 重复精度 [°] | 0.05 |
| 输出端弯管接头数量 | 6.0 |
| 输出端电气接口尺寸 | M8 |
| 最大电压 [V] | 24.0 |
| 每根线的最大电流 [A] | 1.0 |
| 最大电流 [A] | 1.0 |
| 长度 X [mm] | 76.0 |
| 宽度 Y [mm] | 132.0 |
| 高度 Z [mm] | 133.6 |
| 力矩 Mx max. [Nm] | 10.4 |
| 最大轴向力 Fz max。 [N] | 800.0 |
尺寸和最大载荷
最大惯性 J
尺寸和最大载荷
所示力矩和力为静态值，可能会同时出现。必须进行节流，以确保出现旋转动作时不会发生撞击或弹跳现象。否则将缩短使用寿命。
最大惯性 J
- Axe X:
- 回转时间
- Axe Y:
- 转动惯量
- Axe X supérieur:
- 周期/小时
我们很乐意帮您设计其他应用。请联系我们。
General notes about the series
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Customized angle of rotation
More swivel angles are available on request.
Torque in the end positions
Please note that the final angular degrees (approx. 2°) before the end position can only be approached using the force of a single drive piston. For this reason, double actuated modules only have about half the rated torque available in this area. An external stop can be used to provide the full torque even in the end positions.
Swiveling time
is the rotation time of pinion/flange around the nominal rotation angle. Valve switching times, hose filling times, or PLC reaction times are not included and are to be considered when cycle times are calculated.
Standard conditions
The technical data shown refers to an environment of 20 °C and atmospheric pressure.
Housing material
Aluminum alloy, anodized
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Double piston rack and pinion principle
Scope of delivery
Centering sleeves, O-rings for direct connection, assembly and operating manual with manufacturer’s declaration
Warranty
24 months
Service life characteristics
on request