KSP3 315-Z-AS
气动二爪虎钳
ID 1409290
标准型气动夹具
产品特性：
产品特性：
- 双爪夹具
- 中心夹紧
- 标准行程
- 夹具打磨定位孔
- 夹持力放大/外部固定
- 基爪: 细齿和榫槽
- 尺寸: 315 x 315 x 136 mm
- 最大工作压力下的夹持力: 100 kN
- 弹簧组产生额外夹持力: 16 - 32.5 kN
- 单指行程: 6.5 mm
- 最大卡爪高度: 200 mm
- 重复精度: 0.02 mm
- 工作压力: 3 - 6 bar
- 6 bar 时每个双行程的耗气量: 21500 cm³
- 闭合/张开时间: 2 s
- 重量: 70 kg
技术细节
| Stroke per jaw [mm] | 6.5 |
|---|---|
| Clamping force at max. operating pressure [kN] | 100.0 |
| Min. additional clamping force resulting from spring assembly [kN] | 16.0 |
| Max. additional clamping force resulting from spring assembly [kN] | 32.5 |
| Min. operating pressure [bar] | 3.0 |
| Max. operating pressure [bar] | 6.0 |
| Repeat accuracy of vise [mm] | 0.02 |
| Max. jaw height [mm] | 200.0 |
| Distance H [mm] | 40.0 |
| Air consumption per double stroke at 6 bar [cm³] | 21500.0 |
| Closing/opening time [s] | 2.0 |
| Weight [kg] | 70.0 |
Scope of delivery
Clamping force block, mounting screws, cover plugs, clamping sleeves, fitting screws, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)