RotoRi
Jaw turning fixture
Turning out chuck jaws precisely under clamping pressure and grinding out hard chuck jaws is possible using the SCHUNK RotoRi turning set. The set consists of individual rings in different dimensions, allowing continuous adjustment of the desired clamping diameter. It is used in manual and power chucks, and is suitable for 2, 3, 4 and 6 lathe chucks, for both I.D. and O.D. clamping.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Popis
Vantagens – Seus benefícios
- Aumenta a flexibilidade
EU IRIA. e O. D. fixação com anel - Amplo campo de aplicações
Adequado para tamanhos de placa de 80 – 1.600 mm, para placas de 2, 3, 4 e 6 castanhas - Excelentes precisões
Ajuste de precisão de 0,1 mm do diâmetro de giro - aumenta a eficiência econômica
Custos de preparação mais baixos devido aos pinos de fixação RotoFix, bem como economia de custos nas castanhas de placa - Manipulação rápida e flexível
Acessibilidade ideal da ferramenta de torneamento.