DescriptionLightweight 2-jaw power lathe chuck with long jaw stroke, and at the same time high clamping force and pre-installed media feed-through. Particularly suitable for clamping fittings.
Advantages – Your benefitsPrecision wedge hook power chuck for highest quality requirements
Allows excellent machining processes
High efficiency of the wedge hook system
Process-reliable clamping due to high clamping forces
Optimum jaw support for O.D. and I.D. clamping due to a very long base jaw guidance
Allows high clamping forces at a long service life
Optimized lubrication system
Consistently high clamping forces are ensured
Largest jaw stroke at high jaw clamping force
Safe and variable clamping of workpieces over interfering contours
Media feed-through (coolant or air) as option integrated in the chuck body
Flexibility depending on the application
Maximum use of the machine room and maximum rigidity of the system
Base jaws with fine serration or tongue and groove as standard
High flexibility in the range of top jaws
Low chuck weight
Fast acceleration and deceleration operations shorten the cycle times
All functional parts are ground and hardened
Ensures a long life span
Options and special informationRobust 2-jaw chuck with long stroke and simultaneous maximum clamping force
The SCHUNK 2-jaw chuck ROTA 2B is particularly suitable for clamping workpieces for which a large interfering contour must be clamped (e.g. for fitting parts). The lathe chuck achieves this by combining a long jaw stroke with maximum clamping forces.
Standard mounting threads allow many ways of mounting workpiece stops or consoles. Adjustable brass wipers seal the base jaws and offer an excellent protection against water and dirt. The therefrom resulting low wear ensures a long lifetime of the chuck.