TCU-Z-200-3-OV
ID 324857
- Force Fd max.: 5000 N
Détails techniques
| Bloqueo | Sin mecanismo de bloqueo |
|---|---|
| Dureza del elastómero [Shore] | 68.0 |
| Desviación X [°] | ± 1 |
| Desviación Y [°] | ± 1 |
| Desviación Z [°] | ± 1 |
| Peso [kg] | 2.45 |
| Temperatura ambiente mín. [°C] | -10.0 |
| Temperatura ambiente máx. [°C] | 90.0 |
| Fuerza máx. Fd [N] | 5000.0 |
| Conexión directa* | PZN-plus 200 |
| Diámetro D [mm] | 200.0 |
| Altura Z [mm] | 28.5 |
| Momento Mx máx. [Nm] | 160.0 |
| Momento My máx. [Nm] | 160.0 |
| Momento Mz máx. [Nm] | 140.0 |
Dimensiones y cargas máximas
Deflection
Diagrama de carga
Máxima deflexión
Dimensiones y cargas máximas
Las fuerzas y los momentos indicados, son valores máximos en estado de desenclavamiento que pueden darse simultáneamente. En el estado de enclavamiento, solo se admiten las cargas provocadas por el propio peso y la aceleración.
Deflection
Deflection (fa) dependent upon the length (L) to the center of mass
Diagrama de carga
- Axe X:
- Distancia máx.
- Axe Y:
- Peso de manipulación máx.
Máxima deflexión
Desviación (fa) en función de la longitud L hacia el centro de compensación
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Monitoring
by magnetic switch
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Material
Elastomer material
Housing
Aluminum alloy
Scope of delivery
Robot-side mounting screws
Warranty
24 months