KSF3-LH 140-PM
ID 1514321
Productkenmerken
- Klemkrachtblok met 2 klauwen
- Centrisch klemmen
- Lange slag
- Pneumatische afvraging eindpositie
- Pneumatische contactdetectie
- Basisklemmen: Fijne vertanding en messing en groef
- Afmetingen: 140 x 140 x 72,7 mm
- Klemkrachtbereik: 6.5 - 9 kN
- Klemkrachtbereik met turbo: 16.5 - 24 kN
- Slag per klem: 7 mm
- Max. klemhoogte: 120 mm
- Rondloopnauwkeurigheid: 0.01 mm
- Openingsdruk: 6 - 9 bar
- Max. turbodruk: 6 bar
- Luchtverbruik per slag: 1150 cm³
- Sluit-/openingstijd: 0.6 s
- Gewicht: 8.1 kg
Technical details
| 单指行程 [mm] | 7.0 |
|---|---|
| 最小夹持力 [kN] | 6.5 |
| 最大夹持力* [kN] | 9.0 |
| 虎钳重复精度 [mm] | 0.01 |
| 最大卡爪高度 [mm] | 120.0 |
| 距离 H [mm] | 20.0 |
| 6 bar 时每个行程的耗气量 [cm³] | 1150.0 |
| 闭合/张开时间 [s] | 0.6 |
| 重量 [kg] | 8.1 |
Scope of delivery
Clamping force block, fastening screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Clamping force range
The clamping force depends on the stroke due to the spring tension. Max. clamping force is reached in the "open" condition, min. clamping force in the "closed" condition.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)