EZN
汎用グリッパー
この製品はレガシー製品です。
代替製品：
電動サーボ式 3 爪開閉センターグリッパー、マルチトゥースガイドにより、強い把持力を備え、大きなトルク負荷にも対応可能
説明
Advantages – Your benefits
- Drive design of servomotor
for flexible use - With external electronics
for simple integration into existing servo controlled concepts via PROFINET - Pre-positioning capability
to reduce cycle times through a short working stroke - Robust multi-tooth guidance
for precise handling - High maximum moments possible
suitable for using long gripper fingers - Fastening at one gripper side in two screw directions
for universal and flexible gripper assembly
Options and special information
- Control via external controller ECM
The electrical control of the gripper takes place via the separately available controller ECM. The controller can be incorporated into the higher level control concept via PROFINET. The communication interfaces ensure simple integration into the higher level control system and enable the design of industrial bus topologies. - Plug version EZN-S
Plug version EZN-S is available for the ECM controller in addition to the standard variant with 5 m attached connection cable. The gripper has a 30 cm cable and stepped Y-plug in this version. Cable track-compatible or robot-compatible power and sensor cables have to be ordered separately. - Dustproof version SD
absolutely dustproof, increased degree of protection against ingress of materials. - Food-grade lubrication
The product contains food-compliant lubricants as standard. The requirements of standard EN 1672-2:2020 are not fully met. The relevant NSF certificates are available at https://info.nsf.org/USDA/Listings.asp using the lubricant information in the operating manual. Components such as rolling bearings, linear guides, or shock absorbers are not provided with food-compliant lubricants.