RotoRi
Jaw turning fixture
Turning out chuck jaws precisely under clamping pressure and grinding out hard chuck jaws is possible using the SCHUNK RotoRi turning set. The set consists of individual rings in different dimensions, allowing continuous adjustment of the desired clamping diameter. It is used in manual and power chucks, and is suitable for 2, 3, 4 and 6 lathe chucks, for both I.D. and O.D. clamping.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Description
Avantages - Vos bénéfices
- Augmentation de la flexibilité
Serrage intérieur et extérieur avec une bague - Champs application complet
Adapté à des mandrins taille 80 – 1 600 mm, pour des mandrins à 2, 3, 4 et 6 mors - Des niveaux de précisions exceptionnels
Ajustement à 0,1 mm de précision du diamètre d'usinage - Augmentation de la rentabilité
Coûts d'installation réduits grâce aux broches de serrage RotoFix et économies sur les mors de serrage - Pour une manipulation rapide et flexible
Accessibilité optimale de l'outil de tournage.