RM 200-W180-1
ID 313008
- Krouticí moment: 4 Nm
Technical details
| Úhel rotace [°] | 180 |
|---|---|
| Nastavitelnost koncové polohy [°] | 5 |
| Krouticí moment [Nm] | 4.0 |
| Třída ochrany IP | 40 |
| Vlastní hmotnost [kg] | 2.1 |
| Doba otáčení (1x jmenovitý úhel otáčení) bez dodatečného zatížení [s] | 0.21 |
| Spotřeba kapaliny (2 x jmenovitý úhel) [cm³] | 74.0 |
| Jmenovitý provozní tlak [bar] | 6.0 |
| Min. provozní tlak [bar] | 3.0 |
| Max. provozní tlak [bar] | 8.0 |
| Min. okolní teplota [°C] | 5.0 |
| Max. okolní teplota [°C] | 60.0 |
| Opakovatelná přesnost [°] | 0.044 |
| Délka X [mm] | 80.0 |
| Šířka Y [mm] | 142.0 |
| Výška Z [mm] | 115.0 |
| Max. moment My [Nm] | 18.0 |
| Max. axiální síla Fz max. [N] | 1800.0 |
Pro konfiguraci natáčecích modulů doporučujeme užívat náš software Toolbox, který je k dispozici online. Ověření velikosti zvolené jednotky je naprosto nezbytné, protože jinak může dojít k přetížení.
Jiné úhly jsou možné na vyžádání.
Dimensions and maximum loads
Rozsah použití tlumičů
Dimensions and maximum loads
The indicated moments and forces are statical values and may appear simultaneously. Throttling has to be done for ensuring that the rotary movement takes place without impact or bouncing. Otherwise the service life reduces.
Rozsah použití tlumičů
- X-axis:
- Mass moment of inertia
- Y-axis:
- Angle of rotation
General notes about the series
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Flange position
is always drawn in the left end position. It rotates from here to the right in clockwise direction. The arrow points out the direction of rotation.
Customized angle of rotation
More swivel angles are available on request.
Layout or control calculation
For configuration or control calculation of the units, we recommend to use our Toolbox software, which is available online. Verifying the sizing of the selected unit is absolutely necessary, as otherwise overloading may occur.
Swivel vane material
Steel
Housing material
Aluminum alloy, anodized
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
Vane swivel unit
Scope of delivery
Completely ready for operation without bracket for proximity switch and without proximity switch
Warranty
24 months
Service life characteristics
on request