KOM SK 50 Ø27x55
Combination shell and end mill adapters
ID 23000596
KOM SK 50 Ø27x55, Toolholders
- Combination shell and end mill adapters
- Series: Combination shell and end mill adapters
- Toolholder interface: SK 50
- Clamping diameter: 27 mm
- Thread in clamping diameter: M12
- Projecting length: 55 mm
- Run-out accuracy: ≤ 0.006 mm measured from taper to D1
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Technical details
| Technologie | Kombinovavané frézovací nasazovací trny |
|---|---|
| Řada | Kombinovavané frézovací nasazovací trny |
| Rozhraní upínače nástrojů | SK 50 |
| Norma upínače držáku | DIN ISO 7388-1 AD/AF |
| Upínací průměr D1 | 27 mm |
| Závitový upevňovací šroub G | M12 |
| D2 [mm] | 48.0 |
| Projekční délka L1 [mm]/[palce] | 55 mm / 2.2" |
| L4 [mm] | 35.9 |
| L11 [mm] | 33.0 |
| L12 [mm] | 21.0 |
| Vlastní hmotnost [kg] | 3.38 |
| Odolná chladivu | ano |
| Standardní délka | ano |
Version
For mounting cutters with longitudinal or crosswise slot
Run-out accuracy
≤ 0.006 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Data carriers
Bore holes for data carriers according to DIN 69873
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 AD/AF
Bores for form AF are sealed for transport
Scope of delivery
Includes tightening bolt, drive ring, and feather key
Individual
Additional sizes and customized designs are available upon request