ER 11 HSK-E 40x60
ER collet chucks
ID 23002078
ER 11 HSK-E 40x60, Toolholders
- ER collet chucks
- Series: ER collet chucks
- Toolholder interface: HSK-E 40
- Projecting length: 60 mm
- Run-out accuracy: ≤ 0.008 mm at 2.5 x D
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Technical details
| テクノロジー | ERコレットチャック |
|---|---|
| シリーズ | ERコレットチャック |
| ツールバーインターフェース | HSK-E 40 |
| ツールホルダーの標準 | DIN 69893-5 |
| ER クランプのサイズ | ER 11 |
| 最小クランプ径 D1 [mm] | 1.0 |
| 最大クランプ径 D1 [mm] | 7.0 |
| D2 [mm] | 19.0 |
| D3 [mm] | 19.0 |
| 突出長さ L1 [mm]/[インチ] | 60 mm / 2.4" |
| 突出長さ L1 [mm] | 60.0 |
| L4 [mm] | 11.3 |
| L5 [mm] | 40.0 |
| 重量 [kg] | 0.28 |
| 冷却剤対応 | あり |
| 標準長さ | あり |
Concentricità
< 0,008 mm a 2,5 x D
Grado di bilanciatura
G2,5 a 25.000 giri/min o Umax< 1 gmm
Sedi chip
Foro sede chip opzionale
Cambio del portautensile
Per il cambio automatico del portautensile
Vite di regolazione della lunghezza
Senza vite di regolazione della lunghezza assiale
La fornitura comprende
Include la ghiera di bloccaggio
Ogni esigenza
Ulteriori misure e versioni personalizzate disponibili su richiesta