CMS 100-K
ID 1545364
- 피스톤 스크로크 모니터링: 선택 사항
- 유체 피드 스루 수: 12
- 포스 Fz 최대: 1800 N
- 최대 총 탑재량: 43 kg
기술 세부 정보
| 권장 핸들링 중량 [kg] | 43.0 |
|---|---|
| 잠금 감지 | 선택 사항 |
| 도구 유무 모니터링 | 선택 사항 |
| 반복 정밀도 [mm] | 0.02 |
| 중량 [kg] | 1.65 |
| 공압 피드 스루 수 | 12.0 |
| 방사형 사용을 위한 피드 스루 | 12.0 |
| 공기 연결 스레드 공압 피드 스루 (방사형) | G1/8" |
| 로봇측 커플링 플랜지 | ISO 9409-1-100-6-M8 |
| 최소 주위 온도 [°C] | 5.0 |
| 최대 주위 온도 [°C] | 60.0 |
| 나사 연결 다이어그램 | J |
| 최대 정적 인장력 Fz [N] | 1800.0 |
| 최대 동적 모멘트 Mx/My [Nm] | 230.0 |
| 최대 동적 모멘트 Mz [Nm] | 230.0 |
| 최대 정지 모멘트 Mx/My [Nm] | 500.0 |
| 최대 정지 모멘트 Mz [Nm] | 1185.0 |
치수 및 최대 로드
부하 다이어그램
치수 및 최대 로드
이것은 오류 없는 작동의 보장을 위해 체인징 시스템에 작용하도록 허용된 모든 정적 부하의 합입니다.
부하 다이어그램
가속도와 레버 암(Mx/My 기준)을 고려한 최대 핸들링 무게 다이어그램은 기술적인 설계를 대체하지 않습니다.
- X축:
- 레버 암
- Y축:
- 중량
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
Manual via locking lever
Operating principle
The head and adapter are locked and unlocked with a pin by operating the manual lever.
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Warranty
24 months