CELSIO BT-DC30 Ø5x80
Warmschrumpffutter
Ident.-Nr. 1428087
CELSIO BT-DC30 Ø5x80, Werkzeughalter
- Warmschrumpffutter
- Baureihe: CELSIO
- Dual Contact Variante
- Werkzeughalterschnittstelle: BT-DC 30
- Spanndurchmesser: 5 mm
- Auskraglänge: 80 mm
- Rundlaufgenauigkeit: ≤ 0,003 mm gemessen in der Spannbohrung (nach DIN 69882-8)
- Wuchtgüte: G2,5 bei 25.000 1/min oder Umax < 1 gmm
- Min. Drehmoment: 8 Nm
Technische Details
Technology | Heat shrinking toolholder |
---|---|
Series | CELSIO |
Toolholder interface | BT-DC 30 |
Clamping diameter D1 | 5 mm |
D2 [mm] | 17.0 |
D6 [mm] | 12.0 |
Projecting length L1 [mm]/[inch] | 80 mm / 3.1" |
L4 [mm] | 58.0 |
Min. torque [Nm] | 8.0 |
Weight [kg] | 1.0 |
Dual Contact variant | yes |
Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 JD
Face contact
Similar to DIN ISO 7388-2 JD however with face contact
Dual Contact version with simultaneous tapered and flat work surfaces
Length-setting screw
With adjustment screw for axial length adjustment (except Ø 3, Ø 4 and Ø 5)
Balancing screw
With thread for balancing screws (except Ø 3, Ø 4 and Ø 5)
Individual
Additional sizes and customized designs are available upon request