G 220-AZSS-Z30-M2-200-D90-i15
- Max. zdvih: 7340 mm
- Max. hnací síla: 3000 N
Technické údaje
| Max. zdvih H [mm] | 7340.0 |
|---|---|
| Max. hnací síla [N] | 3000.0 |
| Opakovatelná přesnost [mm] | ± 0.05 |
| Max. celková délka [mm] | 8020.0 |
| Max. rychlost [m/s] | 0.67 |
| Max. zrychlení [m/s²] | 20.0 |
| Min. okolní teplota [°C] | 0.0 |
| Max. okolní teplota [°C] | 80.0 |
| Vlastní hmotnost základny včetně pojezdu [kg] | 49.8 |
| Přídavný rozměr na 100 mm zdvihu [kg] | 4.6 |
| Délka pojezdové desky [mm] | 550.0 |
| Vlastní hmotnost pohonu posuvu [kg] | 28.45 |
| Vlastní hmotnost převodovky [kg] | 10.35 |
| Systém vedení | Kolejnicové vedení |
| Počet pojezdů | 2.0 |
| Koncepce pohonu | Pohon ozubeným řemenem |
| Moment volnoběhu [Nm] | 7.2 |
| Převodový poměr | 15 |
| Ozubení | Modul 2, šikmé ozubení |
| Počet zubů pastorku | 30.0 |
| Příčná dráha na otáčku [mm] | 200.0 |
| Délka X [mm] | 680.0 |
| Šířka Y [mm] | 198.0 |
| Výška Z [mm] | 270.0 |
| Max. moment Mx [Nm] | 4000.0 |
| Max. moment My [Nm] | 8000.0 |
| Max. moment Mz [Nm] | 8000.0 |
| Max. síla Fy [N] | 20000.0 |
| Max. síla Fz [N] | 20000.0 |
| Max. síla Fz [N] | 20000.0 |
| poháněné posuvky | ano |
Rozměry a maximální zatížení
Rozměry a maximální zatížení
Uvedené síly a momenty jsou maximální hodnoty individuálního zatížení. Pokud současně působí více sil nebo momentů, budou maximální přípustné individuální hodnoty nižší.
General notes about the series
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Max. stroke
is the maximum permissible stroke. Acceleration and braking distances or possible overrun must be taken into consideration.
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Acceleration and speed
The values specified are the maximum values of the units without loading. The actual accelerations and speeds for your application must be designed separately and can deviate from the maximum values.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Guidance
Rail guide
Drive
servomotors of different providers can be trouble-free adapted
Profile
Extruded aluminum profile
Slide
Aluminum slides
Scope of delivery
Assembly and operating manual with declaration of incorporation
Warranty
24 months