WEL BT-DC 40 Ø8x50
WELDON 엔드 밀 홀더
ID 1428130
WEL BT-DC 40 Ø8x50, 툴홀더
- WELDON 엔드 밀 홀더
- 시리즈: WELDON
- Dual Contact 버전
- 툴홀더 인터페이스: BT-DC 40
- 클램핑 지름: 8 mm
- 투영 길이: 50 mm
- 흔들림 정확도: 테이퍼에서 D1까지 측정 시 0.003mm 이하
- 밸런싱 등급: G2.5 @ 25,000 RPM 또는 Umax < 1 gmm
기술 세부 정보
| Technology | WELDON end mill holders |
|---|---|
| Series | WELDON |
| Toolholder interface | BT-DC 40 |
| Clamping diameter D1 | 8 mm |
| D2 [mm] | 28.0 |
| D6 [mm] | 19.5 |
| Projecting length L1 [mm]/[inch] | 50 mm / 2.0" |
| L2 [mm] | 35.0 |
| L4 [mm] | 23.0 |
| G1 | M8 |
| Weight [kg] | 1.06 |
| Dual Contact variant | yes |
| Coolant-proof | yes |
| Standard length | yes |
Version
For clamping tools with cylindrical shanks in accordance with DIN 1835B/6359HB
Run-out accuracy
≤ 0.003 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Thread G1
G1 = thread for clamping screw
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport
Face contact
Similar to DIN ISO 7388-2 JD/JF however with face contact
Dual Contact version with simultaneous tapered and flat work surfaces
Scope of delivery
Including WELDON clamping screw
Individual
Additional sizes and customized designs are available upon request