WEL HSK-A 50 Ø6x65
WELDON end mill holders
ID 263510
WEL HSK-A 50 Ø6x65, Toolholders
- WELDON end mill holders
- Series: WELDON
- Toolholder interface: HSK-A 50
- Clamping diameter: 6 mm
- Projecting length: 65 mm
- Run-out accuracy: ≤ 0.003 mm measured from taper to D1
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Technical details
| Technology | WELDON end mill holders |
|---|---|
| Series | WELDON |
| Toolholder interface | HSK-A 50 |
| Toolholder standard | DIN ISO 12164-1 |
| Clamping diameter D1 | 6 mm |
| D2 [mm] | 25.0 |
| D6 [mm] | 14.5 |
| Projecting length L1 [mm]/[inch] | 65 mm / 2.6" |
| L2 [mm] | 35.0 |
| L4 [mm] | 39.0 |
| G1 | M6 |
| Weight [kg] | 0.5 |
| Coolant-proof | yes |
| Standard length | yes |
型号
用于夹持圆柱柄的刀具，符合 DIN 1835B/6359HB 标准
回转精度
从锥体到 D1 测量 ≤ 0.003 mm
平衡等级
转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
螺纹 G1
G1 = 夹紧螺钉的螺纹
RAM 数据采集器
符合 DIN 69873 规定的钻孔用于安装数据芯片
刀柄更换
对于自动更换刀柄
标配范围
含 WELDON 侧固式夹持螺钉
单独
可按照客户要求，提供其他尺寸和订制设计