KSP3 250-AS-IM
ID 1467620
特長:
- 2 爪クランピングブロック
- センタークランプ
- 標準ストローク
- クランプ力の増幅 / 外部固定
- 誘導ジョーモニタリング
- ベースジョー: 精密セレーション、タングと溝
- 寸法: 250 x 250 x 98,2 mm
- 最大作動圧力での把持力: 55 kN
- スプリングアセンブリによる追加のクランプ力: 10.5 - 20 kN
- 片側ストローク: 5 mm
- 最大ジョー高さ: 150 mm
- 繰り返し精度: 0.02 mm
- 作動圧力: 3 - 6 bar
- ダブルストローク時の圧縮空気消費量 (6 bar): 9100 cm³
- 閉 / 開時間: 1.6 s
- 重量: 32 kg
技術的詳細
| Stroke per jaw [mm] | 5.0 |
|---|---|
| Clamping force at max. operating pressure [kN] | 55.0 |
| Min. additional clamping force resulting from spring assembly [kN] | 10.5 |
| Max. additional clamping force resulting from spring assembly [kN] | 20.0 |
| Min. operating pressure [bar] | 3.0 |
| Max. operating pressure [bar] | 6.0 |
| Repeat accuracy of vise [mm] | 0.02 |
| Max. jaw height [mm] | 150.0 |
| Air consumption per double stroke at 6 bar [cm³] | 9100.0 |
| Closing/opening time [s] | 1.6 |
| Weight [kg] | 32.0 |
Scope of delivery
Clamping force block, fastening screws, cover plugs, clamping sleeves, fitting screws, inductive proximity switch, connection cable, cover, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Inductive monitoring of clamping slide positions
Possibility to monitor two jaw positions between the end positions of the base jaws using proximity switches (e.g. "open" and "clamped").
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)