DPZ-plus
Pinza universale a tenuta
Oltre all'elevata capacità di carico delle griffe, questa pinza autocentrante a 3 griffe a tenuta stagna è conforme ai requisiti IP67 e non lascia penetrare polvere e liquidi provenienti dall'ambiente di lavoro all'interno dei componenti.
説明
优势 - 您将获益
- 稳定的内部多齿导轨
用于精确抓取各类工件 - 外部圆形导轨处的唇形密封
用于永久性牢固机械手密封 - 可能的最高力矩
适合使用长手指的机械手 - 密封型三指定心机械手
尽管力矩负载高，但是符合 IP67 的要求 - 沿着两个螺钉方向从机械手一侧拧紧
用于通用和灵活的机械手装配 - 在紧凑设计的情况下夹持力最大
应用广泛 - 通过无软管直接接口或螺旋接口供应气源
所有自动化系统均可用的灵活压力供应 - 紧凑尺寸
用于搬运中的最小干扰轮廓
Options and special information
- Gripping force maintenance version AS/IS
The mechanical gripping force maintenance version ensures minimum gripping force even in the event of a pressure drop. In the AS/S version this acts as a closing force, in the IS version as an opening force. - Power booster version KVZ
if higher gripping forces are required - ATEX version EX
for explosive environments - Additional versions
Various options can be combined with each other. Numerous additional options are also available – just tell us what your task is! - Integrated air purge connection
impedes the ingress of dirt into the inside of the gripper - Please note that to achieve an IP 67 protection class, the gripper requires an additional hose for ventilation or a switchable air purge connection. For detailed information, please refer to the assembly and operating manual. Alternatively, a sinter filter (supplied) mounted on the air purge connection can prevent the penetration of dirt particles > 0.12 mm. However, this reduces the protection class to IP 54.
- Food-grade lubrication
The product contains food-compliant lubricants as standard. The requirements of EN 1672-2:2020 are not fully met. The relevant NSF certificates are available at https://info.nsf.org/USDA/Listings.asp using the lubricant information in the operating manual.