SRH-plus 30-W-CB
ID 359263
Universal swivel head SRH-plus, Size: 30, pneumatic, pneumatic feed-through, Shock absorber version: soft, Center Bore (Version CB), Angle of rotation: 180 °, End position adjustability: 3 °, End position damping: hydr. damper
- No. of fluid feed-throughs: 4
- Torque: 9.5 Nm
Technical details
| Angle of rotation [°] | 180 |
|---|---|
| End position adjustability [°] | 3 |
| Torque [Nm] | 9.5 |
| IP protection class | 67 |
| Weight [kg] | 4.3 |
| Fluid consumption (2x nom. angle) [cm³] | 145.0 |
| Swivel time without a payload [s] | 0.9 |
| Nominal operating pressure [bar] | 6.0 |
| Min. operating pressure [bar] | 3.0 |
| Max. operating pressure [bar] | 8.0 |
| Diameter of connecting hose | 6 x 3.9 x 1.05 |
| No. of fluid feed-throughs | 4.0 |
| Max. pressure fluid feed-through [bar] | 8.0 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 60.0 |
| Repeat accuracy [°] | 0.05 |
| Length X [mm] | 96.0 |
| Width Y [mm] | 153.7 |
| Height Z [mm] | 156.2 |
| Moment Mx max. [Nm] | 19.0 |
| Max. axial force Fz max. [N] | 800.0 |
All units are also available in an FKM version. Please contact us for details.
치수 및 최대 로드
Max. admissible inertia J
치수 및 최대 로드
표시된 모멘트와 포스는 통계적 값이며 동시에 나타날 수 있습니다. 회전 운동이 충격이나 튕김 없이 이루어지도록 하기 위해 스로틀링해야 합니다. 그러지 않으면 사용 수명이 단축됩니다.
Max. admissible inertia J
- X-axis:
- Swiveling time
- Y-axis:
- Mass moment of inertia
- X-axis top:
- Cycles per hour
The diagrams are valid for applications with a symmetrical design (*) to the swivel axis: one-sided centrically arranged to one mounting face (**), and with an operating pressure of 6 bar. The mass moment of inertia always refers to the swiveling axis. The cycle times can be adjusted via throttling and adjustment of the shock absorber's stroke. Otherwise the lifetime may reduce.
On request, we are glad to assist you in designing other applications. Please contact us.
On request, we are glad to assist you in designing other applications. Please contact us.
시리즈에 관한 일반 참고 사항
반복 정밀도
100회 연속 사이클 동안 말단 위치의 분포로 정의됩니다.
맞춤형 회전 각도
요청 시 더 많은 스위블 각도를 사용할 수 있습니다.
말단 위치의 토크
말단 위치 앞 최종 각도(약 2°)는 단일 드라이브 피스톤의 힘을 사용해야만 접근할 수 있다는 것을 참고해 주십시오. 이 때문에, 이중 작동 모듈은 이 영역에서 사용 가능한 정격 토크의 절반만을 가집니다. 외부 스톱을 사용하여 말단 위치에서 완전한 토크를 제공할 수 있습니다.
선회 시간
정격 회전 각도 주변 피니언/플랜지의 회전 시간입니다. 밸브 전환 시간, 호스 충전 시간 또는 PLC 반응 시간은 포함되지 않으므로 사이클 시간이 계산될 때 고려되어야 합니다.
표준 조건
표시된 기술 데이터는 20°C 및 대기압 환경을 나타냅니다.
하우징 재료
알루미늄 합금, 양극 처리
작동
공압, ISO 8573-1:2010 [7:4:4]에 따른 여과된 압축 에어.
작동 원리
더블 피스톤 랙 및 피니언 원리
제공 범위
센터링 슬리브, 직접 연결용 O링, 조립, 제조업체 선언문을 포함한 작동 매뉴얼
보증
24개월
서비스 수명 특징
요청 시