WEL JIS-BT 50 Ø25x100
WELDON end mill holders
ID 23001302
WEL JIS-BT 50 Ø25x100, 툴홀더
- WELDON 엔드 밀 홀더
- 시리즈: WELDON
- 툴홀더 인터페이스: JIS-BT 50
- 클램핑 지름: 25 mm
- 투영 길이: 100 mm
- 흔들림 정확도: 테이퍼에서 D1까지 측정 시 0.003mm 이하
- 밸런싱 등급: G2.5 @ 25,000 RPM 또는 Umax < 1 gmm
Technical details
| Technology | WELDON end mill holders |
|---|---|
| Series | WELDON |
| Toolholder interface | JIS-BT 50 |
| Toolholder standard | DIN ISO 7388-2 JD/JF |
| Clamping diameter D1 | 25 mm |
| D2 [mm] | 65.0 |
| D6 [mm] | 44.5 |
| Projecting length L1 [mm]/[inch] | 100 mm / 3.9" |
| L2 [mm] | 60.0 |
| L4 [mm] | 62.0 |
| G1 | M18x2 |
| Weight [kg] | 4.98 |
| Coolant-proof | yes |
| Standard length | yes |
Version
For clamping tools with cylindrical shanks in accordance with DIN 1835B/6359HB
Run-out accuracy
≤ 0.003 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Thread G1
G1 = thread for clamping screw
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport
Scope of delivery
Including WELDON clamping screw
Individual
Additional sizes and customized designs are available upon request