arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
WEL SCAPTO C5 Ø25x80 Ilustracja analogiczna

WEL SCAPTO C5 Ø25x80

Uchwyty frezarskie WELDON

ID 23004319

WEL SCAPTO C5 Ø25x80, Oprawki narzędziowe
  • Uchwyty frezarskie WELDON
  • Seria: WELDON
  • Złącze uchwytu narzędziowego: SCHUNK CAPTO C5
  • Średnica mocowania: 25 mm
  • Przewidywana długość: 80 mm
  • Dokładność ruchu obrotowego: ≤ 0,003 mm mierzone od stożka do D1
  • Stopień wyważenia: 2,5 G przy 25 tys. obr./min lub Umaks. < 1 gmm
Zakres dostawy: Zawiera śrubę zaciskową WELDON
Technology WELDON end mill holders
Series WELDON
Toolholder interface SCHUNK CAPTO C5
Toolholder standard ISO 26623-1
Clamping diameter D1 25 mm
D2 [mm] 64.5
D6 [mm] 44.5
Projecting length L1 [mm]/[inch] 80 mm / 3.1"
L2 [mm] 60.0
L4 [mm] 57.5
G1 M18x2
Weight [kg] 1.6
Coolant-proof yes
Standard length yes
These product variants are suitable for both milling as well as turning centers

Version
For clamping tools with cylindrical shanks in accordance with DIN 1835B/6359HB

Run-out accuracy
≤ 0.003 mm measured from taper to D1

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Thread G1
G1 = thread for clamping screw

Data carriers
Bore holes for data carriers according to DIN 69873

Toolholder changes
For automatic toolholder changes

Scope of delivery
Including WELDON clamping screw

Individual
Additional sizes and customized designs are available upon request