AGE-U 050
ID 1312860
Compensation unit AGE-U, Size: 050
- Compensation XY: ± 2.7 mm
- Compensation Z: 6.1 mm
- Workpiece weight: 5 kg
- Deflection rotatory: ± 8 °
- Min. return force with integrated spring: 36 N
- Max. return force with integrated spring: 92 N
Technical details
| Compensation XY* [mm] | ± 2.7 |
|---|---|
| Compensation Z [mm] | 6.1 |
| Angular deflection [°] | ± 3 |
| Deflection rotatory [°] | ± 8 |
| Recommended handling weight, vertical [kg] | 5.0 |
| Min. return force with integrated spring [N] | 36.0 |
| Max. return force with integrated spring [N] | 92.0 |
| Min. operating pressure stiffness adjustment [bar] | 0.3 |
| Max. operating pressure stiffness adjustment [bar] | 2.1 |
| Min. operating pressure locking [bar] | 4.1 |
| Max. operating pressure locking [bar] | 6.9 |
| Robot-side connection | ISO 9409-1-50-4-M6 |
| Tool-side connection | ISO 9409-1-50-4-M6 |
| Weight [kg] | 0.6 |
| Moment Mx max. [Nm] | 6.8 |
| Moment My max. [Nm] | 6.8 |
| Moment Mz max. [Nm] | 3.4 |
*During compensation in the X-Y direction, the product contracts minimally due to the cone on the overload pin along the Z axis. For further information on the product, see the operating manual.
尺寸和最大载荷
Load chart
Compensation force Fd
尺寸和最大载荷
这是可影响补偿装置的所有力矩和负载之和的最大值（加速力和扭矩、过程力等），以确保功能不出差错。
Load chart
- X-axis:
- Momente Mx, My
- Y-axis:
- Angle in degrees
The indicated angular deflections are maximum values and depend on the operating pressure. In the locked state, the moment load caused by the mass of the customer-side tool and the acceleration must not lead to any deflection, otherwise the maximum number of load cycles is reduced, and the compensation unit can be damaged.
Compensation force Fd
- X-axis:
- Pressure
- Y-axis:
- Force
Compensating outside the operating pressure range for adjusting the stiffness reduces the maximum number of load cycles and may result in damage to the compensation unit.
产品系列的常规说明
恶劣环境条件
请注意：在恶劣环境条件（例如：冷却液区域、铸造和研磨粉尘）下使用可能大大缩短装置的使用寿命，我公司将不承担任何保修责任。但是，大部分情况下，我们可以找到解决方案。详细信息，请咨询我们。
搬运重量
是连接到法兰的总荷载重量。设计时，应注意允许的力和力矩。请注意，超过建议的搬运重量会缩短使用寿命。
启动
弹簧回复通过弹簧力和压缩空气
外壳
硬质阳极化铝合金，硬化钢功能部件
标配范围
订购型号中的补偿单元、用于机械连接的元件和安全信息。对应的产品说明书，可以前往 schunk.com/downloads-manuals 下载。
保修期
24 个月