arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
CELSIO BT-DC 40 Ø10x90 Abbildung ähnlich

CELSIO BT-DC 40 Ø10x90

Warmschrumpffutter

Ident.-Nr. 1428561

Lieferzeit auf Anfrage
CELSIO BT-DC 40 Ø10x90, Werkzeughalter
  • Warmschrumpffutter
  • Baureihe: CELSIO
  • Dual Contact Variante
  • Werkzeughalterschnittstelle: BT-DC 40
  • Spanndurchmesser: 10 mm
  • Auskraglänge: 90 mm
  • Rundlaufgenauigkeit: ≤ 0,003 mm gemessen in der Spannbohrung (nach DIN 69882-8)
  • Wuchtgüte: G2,5 bei 25.000 1/min oder Umax < 1 gmm
  • Min. Drehmoment: 70 Nm
Technology Heat shrinking toolholder
Series CELSIO
Toolholder interface BT-DC 40
Clamping diameter D1 10 mm
D2 [mm] 32.0
D6 [mm] 24.0
Projecting length L1 [mm]/[inch] 90 mm / 3.5"
L2 [mm] 42.0
L3 [mm] 10.0
L4 [mm] 63.0
G M8x1
Min. torque [Nm] 70.0
Weight [kg] 1.2
Dual Contact variant yes
Coolant-proof yes
Standard length yes

Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Tool shank quality
h6

Data carriers
Bore for data carrier as an option

Toolholder changes
For automatic toolholder changes

Coolant supply
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport

Face contact
Similar to DIN ISO 7388-2 JD/JF however with face contact
Dual Contact version with simultaneous tapered and flat work surfaces

Length-setting screw
With adjustment screw for axial length adjustment (except Ø 3, Ø 4 and Ø 5)

Balancing screw
With thread for balancing screws (except Ø 3, Ø 4 and Ø 5)

Individual
Additional sizes and customized designs are available upon request