KRP3-LH 200-AS
Pneumatische 3-Backen-Kraftspannblöcke
Ident.-Nr. 1499497
Pneumatischer Kraftspannblock Standard
Produktmerkmale:
Produktmerkmale:
- 3-Backen-Kraftspannblock
- Zentrisch spannend
- Langhub
- Spannkraftverstärkung/Außensicherung
- Grundbacken: Spitzverzahnung und Kreuzversatz
- Abmessungen: 200 x 200 x 90,2 mm
- Spannkraft bei max. Betriebsdruck: 25 kN
- Zusätzliche Spannkraft aus Federpaket: 3 - 5.5 kN
- Hub pro Backe: 10 mm
- Max. Backenhöhe: 200 mm
- Wiederholgenauigkeit: 0.02 mm
- Betriebsdruck: 3 - 9 bar
- Luftverbrauch pro Doppelhub bei 6 bar: 5100 cm³
- Schließ-/Öffnungszeit: 1 s
- Gewicht: 19 kg
Technische Details
| Hub pro Backe [mm] | 10.0 |
|---|---|
| Spannkraft bei max. Betriebsdruck [kN] | 25.0 |
| Min. zusätzliche Spannkraft aus Federpaket [kN] | 3.0 |
| Max. zusätzliche Spannkraft aus Federpaket [kN] | 5.5 |
| Min. Betriebsdruck [bar] | 3.0 |
| Max. Betriebsdruck [bar] | 9.0 |
| Wiederholgenauigkeit Spanner [mm] | 0.02 |
| Max. Backenhöhe [mm] | 200.0 |
| Abstand H [mm] | 30.0 |
| Luftverbrauch pro Doppelhub bei 6 bar [cm³] | 5100.0 |
| Schließ-/Öffnungszeit [s] | 1.0 |
| Gewicht [kg] | 19.0 |
Scope of delivery
Clamping force block, fastening screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)