arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
CELSIO CF SK 40 Ø5x80 Abbildung ähnlich

CELSIO CF SK 40 Ø5x80

Warmschrumpffutter

Ident.-Nr. 26002791

Lieferzeit auf Anfrage
CELSIO CF SK 40 Ø5x80, Werkzeughalter
  • Warmschrumpffutter
  • Baureihe: CELSIO
  • Cool Flow Variante
  • Werkzeughalterschnittstelle: SK 40
  • Spanndurchmesser: 5 mm
  • Auskraglänge: 80 mm
  • Rundlaufgenauigkeit: ≤ 0,003 mm gemessen in der Spannbohrung (nach DIN 69882-8)
  • Wuchtgüte: G2,5 bei 25.000 1/min oder Umax < 1 gmm
  • Min. Drehmoment: 8 Nm
Technologie Warmschrumpffutter
Baureihe CELSIO
Werkzeughalterschnittstelle SK 40
Werkzeughalternorm DIN ISO 7388-1 AD/AF
Spanndurchmesser D1 5 mm
D2 [mm] 17.0
D6 [mm] 10.0
Auskraglänge L1 [mm] / [inch] 80 mm / 3.1"
L2 [mm] 15.5
L4 [mm] 60.9
Min. Drehmoment [Nm] 8.0
Gewicht [kg] 1.01
Cool Flow Variante ja
Standardlänge ja

Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Tool shank quality
h6

Data carriers
Bore holes for data carriers according to DIN 69873

Toolholder changes
For automatic toolholder changes

Coolant supply
Cool Flow version
Coolant is fed via two coolant bore holes directly to the cutting edge of the tool
Coolant supply according to ISO 7388 AD/AF
Bores for form AF are sealed with set-screws as transport safety

Length-setting screw
With adjustment screw for axial length adjustment (except Ø 3, Ø 4 and Ø 5)

Balancing screw
With thread for balancing screws (except Ø 3, Ø 4 and Ø 5)

Individual
Additional sizes and customized designs are available upon request