CPS 071-K
ID 1591027
- Lock sensing: optional
- No. of fluid feed-throughs: 8
- Force Fz max.: 8100 N
Technical details
| バージョン | 標準バージョン |
|---|---|
| ロック検出 | オプション |
| ロック力 [N] | 8100.0 |
| ばね力 (作動ピストン) [N] | 93.0 |
| 繰り返し精度 [mm] | 0.015 |
| 重量 [kg] | 2.0 |
| ロック時の最大距離 [mm] | 3.0 |
| 空圧フィードスルーの数 | 8x G1/4" |
| メイン接続のロック / アンロック | G1/8" |
| XY 軸の最大許容オフセット [mm] | ± 2 |
| 最大許容角度オフセットXY [°] | ± 0.6 |
| 最大許容角度オフセット Z [°] | ± 1 |
| 最低周囲温度 [°C] | 5.0 |
| 最高周囲温度 [°C] | 60.0 |
| 最低作動圧力 [bar] | 4.5 |
| 最大作動圧 [bar] | 7.0 |
| 呼び作動圧力 [bar] | 6.0 |
| ネジ接続の図 | 2 x J |
| 開時間 [s] | 0.1 |
| 閉時間 [s] | 0.3 |
| ダブルストロークあたりのシリンダー容積 [cm³] | 81.0 |
| 6 bar での流量 (1系統あたり) | 900 l/min (G1/4") |
| 動的最大モーメント Mx [Nm] | 600.0 |
| 動的最大モーメント My [Nm] | 600.0 |
| 動的最大モーメント Mz [Nm] | 600.0 |
| 静的最大モーメント Mx [Nm] | 1800.0 |
| 静的最大モーメント My [Nm] | 1800.0 |
| 静的最大モーメント Mz [Nm] | 1800.0 |
| 力 Fx max. [N] | 11000.0 |
| 力 Fy 最大 [N] | 11000.0 |
| 力 Fz 最大 [N] | 8100.0 |
| 力 Fx 最大 動的 [N] | 3700.0 |
| 力 Fy 最大 動的 [N] | 3700.0 |
| 力 Fz 最大 動的 [N] | 2700.0 |
最大荷重
荷重チャート
最大荷重
これは、ツールチェンジャに作用することが許容されるすべての静的負荷の合計です。
荷重チャート
- X-axis:
- レバーアーム
- Y-axis:
- 荷重容量
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Minimum pressure
The minimum pressure is the required minimum pressure to lock the system. This pressure must be continuously present during operation.
Self-retaining
The automatic tool changer has a self-retaining feature that prevents the tool from falling off in case of the pressure drop. The change master and change adapter can be separated by pneumatically actuating the piston.
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
piston-actuated balls with integrated spring (to support the locked piston position)
Media transmission
variable via attachment feed-through modules, depending on the unit size
Housing
The housing consists of high-strength, hard-coated aluminum alloy The functional components are made of hardened corrosion free steel.
Warranty
24 months
Service life characteristics
on request