DDF 2-100-P4-E6
ID 323112
- 유체 피드 스루 수: 4
- 전기 피드 스루 수: 6
- 공작물 중량: 125 kg
- 포스 Fz 최대: 5000 N
- 포스 Fd 최대: 12000 N
Specifiche tecniche
| 피드 스루 | 공압 및 전기 피드 스루 |
|---|---|
| 권장 핸들링 중량 [kg] | 125.0 |
| 최대 드라이브 속도 [1/min] | 100.0 |
| 최대 회전 속도 [°/s] | 600.0 |
| 정격 토크 [Nm] | 8.0 |
| 시작 토크 [Nm] | 10.0 |
| 회전 각도 [°] | > 360 |
| 유체 피드 스루 수 | 4.0 |
| 공기 연결 스레드 공압 피드 스루 | 4x G1/8" |
| 연결당 최대 압력 [bar] | 10.0 |
| 유속 @ 6bar(채널당) [l/min] | 240.0 |
| 최대 압력 공기 제거 [bar] | 1.0 |
| 전기 피드 스루 수 | 6.0 |
| 최대 전압 [V] | 60.0 |
| 최대 전류 강도 [A] | 1.0 |
| 중량 [kg] | 6.1 |
| 로봇측 연결 | ISO 9409-1-100-6-M8 |
| 최소 주위 온도 [°C] | 5.0 |
| 최대 주위 온도 [°C] | 60.0 |
| 최대 동적 휨 모멘트 Mx* [Nm] | 290.0 |
| 최대 동적 휨 모멘트 My* [Nm] | 290.0 |
| 최대 동적 비틀림 모멘트 Mz* [Nm] | 200.0 |
| 최대 절삭력 Fq* [N] | 1250.0 |
| 직경 D [mm] | 136.0 |
| 높이 Z [mm] | 128.5 |
| 굽힘 모멘트 Mx [Nm] | 500.0 |
| 굽힘 모멘트 My [Nm] | 500.0 |
| 포스 Fz 최대 [N] | 5000.0 |
| 최대 포스 Fd [N] | 12000.0 |
요청 시, 진공 피드 스루용 버전을 이용할 수 있습니다. 자세한 사항은 문의해 주십시오.
치수 및 최대 로드
치수 및 최대 로드
회전 피드 스루에 작용될 수 있는 정지 힘 및 모멘트
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Mounting
Standardized ISO 9409 interface (robot-side)
Housing
high-strength, hard-coated aluminum alloy
Scope of delivery
Rotary feed-through in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months