PGN-plus-P 240-2-IS-SD
Ident.-Nr. 1317755
- Stroke per jaw: 17 mm
- Opening force: 14500 N
- Max. ambient temperature: 90 °C
Technische Details
| Hub pro Backe [mm] | 17.0 |
|---|---|
| Öffnungskraft [N] | 14500.0 |
| Öffnungskraft (bei Fingerlänge 0 mm) [N] | 15200.0 |
| Min. Federkraft [N] | 5000.0 |
| Eigenmasse [kg] | 12.4 |
| Empfohlenes Werkstückgewicht [kg] | 45.0 |
| Zylindervolumen pro Doppelhub [cm³] | 1400.0 |
| Min. Betriebsdruck [bar] | 4.0 |
| Max. Betriebsdruck [bar] | 6.5 |
| Nennbetriebsdruck [bar] | 6.0 |
| Min. Sperrluftdruck [bar] | 0.5 |
| Max. Sperrluftdruck [bar] | 1.0 |
| Schließzeit [s] | 0.9 |
| Öffnungszeit [s] | 0.45 |
| Schließ-/Öffnungszeit mit Feder [s] | 0.6 |
| Max. zulässige Fingerlänge [mm] | 260.0 |
| Max. zulässige Masse pro Finger [kg] | 9.5 |
| Schutzart IP | 64 |
| Min. Umgebungstemperatur [°C] | 5.0 |
| Max. Umgebungstemperatur [°C] | 90.0 |
| Wiederholgenauigkeit [mm] | 0.04 |
| Reinraumklasse ISO 14644-1 | 6 |
| Zertifizierungsstand Reinraumklasse ISO 14644-1 | 2015 |
| Moment Mx max. [Nm] | 280.0 |
| Moment My max. [Nm] | 250.0 |
| Moment Mz max. [Nm] | 260.0 |
| Max. Kraft axial Fz max. [N] | 14000.0 |
| Staubdicht-Version | Sì |
Dimensions and maximum loads
Maximum permitted finger projection
Greifkraft Innengreifen
Maximal zulässige Auskragung
Dimensions and maximum loads
The indicated moments and forces are statical values, apply for each base jaw and may appear simultaneously. Loads may additionally occur to the moment produced by the gripping force itself.
Maximum permitted finger projection
Greifkraft Innengreifen
- X-Achse:
- Fingerlänge
- Y-Achse:
- Greifkraft
Maximal zulässige Auskragung
Lmax entspricht der maximal zulässigen Fingerlänge, siehe technische Datentabelle.
- green
- Zulässiger Bereich
- grey
- Unzulässiger Bereich
General notes about the series
Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).
Finger length
is measured from the reference surface as the distance P in direction to the main axis. The maximum permissible finger length applies until the nominal operating pressure is achieved. With higher pressures, the finger length must be reduced proportionally to the nominal operating pressure.
Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.
Workpiece weight
is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.
Closing and opening times
are movement times of the base jaws only, without application-specific gripper fingers. Valve switching times, hose fill times, or PLC reaction times are not included, and are to be considered when cycle times are calculated.
Principio di funzionamento
Riduttore a cuneo con trasmissione della forza superficiale
Materiale del corpo pinza
Alluminio
Materiale delle griffe base
Acciaio
Azionamento
pneumatico, tramite aria compressa filtrata secondo la norma ISO 8573-1:2010 [7:4:4].
Garanzia
36 mesi
Caratteristiche di vita utile
Su richiesta
La fornitura comprende
Supporto per interruttori di prossimità, boccole di centraggio, guarnizioni OR per collegamento diretto, istruzioni di montaggio (il manuale d'uso con dichiarazione di incorporazione è disponibile online)
Dispositivo di mantenimento della forza di presa
tramite dispositivo di sicurezza meccanico per mantenimento della forza di presa oppure tramite la valvola di mantenimento pressione SDV-P