arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.

Accessories/spare parts

The original for your workpiece clamping technology.

The extensive range of SCHUNK accessories, including controllers, assembly tools, extensions, and cover plates extend the versatility of our products. Original SCHUNK accessories ensure maximum functionality, reliability, and absolute process reliability.
All filters
1,850 results
Quick-change pallet system

Quick-change pallet system

Integrated mechanical quick-change pallet system with 52 x 52 mm gauge on brackets, pyramid brackets and tombstones
Show series
RGG

RGG

For cleaning of clamping devices and automation of machine tools. The cleaning unit can be used in any machine, which provides compressed air or coolant supply via the tool mounting.
Show series
Workpiece pin

Workpiece pin

Workpiece stops are used on claw jaws and pendulum jaws to change the clamping depth. As needed, they can be processed to a desired height.
Workpiece stops can also be used for special workpiece-specific special chuck jaws
They are made of C45 steel either as soft or hardened variants.
Show series
RotoRi

RotoRi

Turning out chuck jaws precisely under clamping pressure and grinding out hard chuck jaws is possible using the SCHUNK RotoRi turning set. The set consists of individual rings in different dimensions, allowing continuous adjustment of the desired clamping diameter. It is used in manual and power chucks, and is suitable for 2, 3, 4 and 6 lathe chucks, for both I.D. and O.D. clamping.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Show series
ADR

ADR

The compact and light turning ring sets ADR make child's play of precise turning out or grinding out of highly hardened and heat-treated soft chuck jaws. These are easy to handle and versatile in use on 2, 3 and 6 jaw chucks.
Instead of a variety of different rings, the boring sets mean you only need a few turning disks to implement clamping diameters for O.D. clamping in 2 mm steps. The individual size required is defined via three pins. These have to be screwed into the thread of the jaw turning rings and then inserted into the lathe chuck.
Since no fitting bores are necessary, the turning disks can be used by Plug & Work in no time at all. For more finely graduated intermediate diameters, the pins can be milled. They are available as additional spare parts kits.
Show series
BSA

BSA

The jaw turning fixture is suitable for turning out all soft or heat-treated chuck jaws on manual and power lathe chucks, and for grinding out hardened chuck jaws on manual and power lathe chucks. The adjusting range can be adjusted by using a scroll.
Large clamping ranges can be covered using the chuck jaw turning fixture. The heavy version BSA is mainly used for power lathe chucks, and is suitable for high clamping forces up to 75 kN.
Show series
BAV

BAV

The jaw turning fixture is suitable for turning out all soft or heat-treated chuck jaws on manual and power lathe chucks, and for grinding out hardened chuck jaws on manual and power lathe chucks.
Large clamping ranges can be covered using the chuck jaw turning fixture. The light version BAV is suitable for low clamping forces up to 30 kN.
Show series
UGE 30

UGE 30

The UGE 30 clamping insert allows soft top jaws and jaw blanks to be converted into full-fledged hard chuck jaws. It is used with turning jaws, vise jaws, and devices for O.D. and I.D. clamping of cubic parts. On request, the clamping insert can also be used in SCHUNK special chuck jaws according to our design or your own.
By simply exchanging worn out inserts, a cost reduction can be achieved. The required bore hole and thread are easy to manufacture. Chuck jaw hardening is recommended.
Show series
HM

HM

The round version of the HM clamping insert with soldered carbide offers an economic solution combining soft top jaws and blanks to manufacture full-fledged hard chuck jaws. On request, the clamping insert can also be used in SCHUNK special chuck jaws according to our design or your own. By simply exchanging worn out inserts, a cost reduction can be achieved.
The clamping insert is suitable for O.D. clamping and is fastened from behind. The seat for the clamping insert can be easily manufactured.
Show series
RHS

RHS

The clamping insert RHS offers an economical solution combining soft top jaws and blanks to manufacture claw jaws. Ideally, the support jaws should be hardened in order to avoid tilting of the clamping inserts. The clamping insert is suitable for moderate level machining and promises optimum workpiece centering via round inserts as well as safe clamping with a low clamping depth.
The simple do-it-yourself construction is explained in the installation instructions, which is included in the scope of delivery.
Show series
SP

SP

The hard clamping insert SP for pendulum jaws.
Standardized pendulum jaws from SCHUNK enable cost-efficient and safe clamping of thin-walled workpieces that are deformation-prone.
Show series
Clamping insert

Clamping insert

Clamping inserts with six different clamping contours for flexible clamping of a wide range of workpieces. Can be positioned on TANDEM WTG-A jaws via bore hole grid.
Show series
Clamping bar

Clamping bar

Clamping bars with three different grip steps for flexible clamping of workpieces. Can be positioned on TANDEM WTG-A jaws via bore hole grid.
Show series
Content available soon

GFD mini

Compact! Manual! Versatile! – The flat set-up system with four clamping pins in the gauges 52 x 52 mm and 96 x 96 mm
Show series
SRP

SRP

The dress and cleaning plate SRP is suitable for cleaning dirty chuck jaw serrations quickly and safely. The dirt accumulates in the diagonal slot, which also facilitates the cleaning process. It is hardened with precision-ground serration on both sides and adjusted to fit the fine serration of the chuck jaws.
Fast deburring and equalizing of damaged points in the serration allows for increased clamping precision and reduces wear.
Apply grinding paste (grain size 320), insert chuck jaws on top of it, and evenly move them to both sides.
Show series
UGE 20

UGE 20

The clamping insert UGE enables the production of claw jaws from jaw blanks, ensuring safe clamping of blanks/forged parts, and workpieces made of high-strength materials. In addition, high torques for heavy cuts can be transferred and costs can be reduced by replacing the worn out inserts.
UGE 20 is suitable for O.D. and I.D. clamping. Due to the wedge shape, the workpiece can be additionally pulled down, and in turn ensures a higher clamping reliability. The clamping insert is fastened from above. For installation, the angular milling cutter WSF UGE 20 (ID 010015) is required, which makes the production of a suitable milled recess and thread easier. Hardening of the jaw blanks is not required.
Show series
WSF

WSF

The angular milling cutter makes it easier to create a suitable recess or thread in the chuck jaws for installing the clamping insert UGE 20.
Show series
HS

HS

The clamping insert HS offers an economical solution combining soft top jaws and blanks to manufacture full-fledged hard chuck jaws. It is able to better penetrate the hard cast skin in cast workpieces or the compressed surfaces of forged parts, it increases the drive effect and is used to clamp high-strength materials. On request, the clamping insert can also be used in SCHUNK special chuck jaws according to our design or your own.
By simply exchanging worn out inserts, a cost reduction can be achieved. The clamping insert is suitable for O.D. and I.D. clamping and is fastened from behind. The seat for the clamping insert can be easily manufactured.
Show series
Hexagon socket cylindrical screw

Hexagon socket cylindrical screw

Jaw fastening screws with normal metric or fine threads, according to DIN 912, quality 12.9. Suitable for use with base jaws.
Show series
HM 15

HM 15

The clamping insert HM in the square version with soldered carbide offers an economic solution combining soft top jaws and blanks to manufacture full-fledged hard chuck jaws. On request, the clamping insert can also be used in SCHUNK special chuck jaws according to our design or your own. By simply exchanging worn out inserts, a cost reduction can be achieved.
The clamping insert is suitable for O.D. clamping and is fastened from behind. The seat for the clamping insert can be easily manufactured.
Show series
ADS

ADS

Boring kit for pendulum jaws for turning out pendulum jaws with soft clamping inserts SW. Each set includes three fitting disks and three fixing disks.
Show series
SW

SW

The soft clamping insert SW for pendulum jaws for turning out clamping diameters.
Standardized pendulum jaws from SCHUNK enable cost-efficient and safe clamping of thin-walled workpieces that are deformation-prone.
Show series
UGE 10

UGE 10

The clamping insert UGE enables the production of claw jaws from jaw blanks, ensuring safe clamping of blanks/forged parts, and workpieces made of high-strength materials. In addition, high torques for heavy cuts can be transferred and costs can be reduced by replacing the worn out inserts.
UGE 10 is suitable for flat and round clamping surfaces as well as for O.D. and I.D. clamping. The clamping insert is attached from the front, where it can be placed in a round or a flat groove. The thread is easy to manufacture. Hardening of the chuck jaws is required.
Show series
Reduction adapter

Reduction adapter

Adapter for reducing interfering contours for workpieces as well as compensating different clamping heights.
Show series
Clamping pins

Clamping pins

Clamping pins with short taper for form-fit connection of workpieces or devices with the clamping modules.
Show series
Clamping Rings

Clamping Rings

Clamping rings with ground short taper for form-fit connection of clamping pallets or devices with the clamping modules.
Show series
Clamping pins

Clamping pins

Clamping pins with short taper for form-fit connection of workpieces or devices with the clamping modules.
Show series
Clamping pins for NSE mikro

Clamping pins for NSE mikro

Clamping pins with short taper for form-fit connection of workpieces or devices with the clamping modules.
Show series
Clamping pins for NSE mini

Clamping pins for NSE mini

Clamping pins with short taper for form-fit connection of clamping pallets, workpieces or devices with the clamping modules.
Show series
Cylindrical brush

Cylindrical brush

Cleaning brush for cleaning the clamping diameters from Ø 6 mm to Ø 32 mm.
Show series
TK-Cleaner

TK-Cleaner

Cleaning brush TK Cleaner for cleaning the clamping diameter.
Show series
Tapered cleaner SK/BT/CAT

Tapered cleaner SK/BT/CAT

The SK/BT/CAT tapered cleaner is used to clean the machine spindle.
Show series
TENDO GZB-S sleeve remover

TENDO GZB-S sleeve remover

TENDO GZB-S sleeve remover for intermediate sleeves GZB-S Ø 12 to GZB-S Ø 32. For safe and easy removal of intermediate sleeves GZB-S from TENDO hydraulic expansion toolholders.
Show series
TENDO hexagon socket wrench

TENDO hexagon socket wrench

Hexagon socket wrench with cross handle for clamping and unclamping tool shanks in TENDO hydraulic expansion toolholders.
Show series
Grease gun

Grease gun

Grease gun for lubrication of all standard manual and power lathe chucks as well as clamping force blocks from SCHUNK.
Show series
LP 410

LP 410

High-performance grease as standard for regularly lubricating SCHUNK TANDEM clamping force blocks.
Show series
LINOMAX

LINOMAX

High-performance grease as standard for regularly lubricating SCHUNK manual and power lathe chucks and steady rests.
Show series
Stationary clamping force tester

Stationary clamping force tester

Universally applicable clamping force tester for stationary clamping devices
Show series
Clamping force tester

Clamping force tester

Clamping force tester for measuring the jaw clamping force of 2, 3 and 6-jaw chucks to ensure the greatest possible process reliability in daily use.
Show series
Maintenance kit

Maintenance kit

A set consists of a grease gun, grease cartridge, chip protection, and a center plug for regular maintenance of SCHUNK manual lathe chucks.
Show series
Maintenance unit

Maintenance unit

Maintenance unit consisting of pressure regulator, water separator, oiler, and feeder cables for preparing the compressed air for SCHUNK pneumatic power lathe chucks.
Show series
Pressure measuring unit

Pressure measuring unit

Pressure measurement devices for checking the pressure tightness of SCHUNK pneumatic power lathe chucks.
Show series
Torque wrench

Torque wrench

Torque wrench for actuation of SCHUNK manual lathe chucks.
Show series
Ratchet

Ratchet

Ratchet for fast actuation of SCHUNK manual lathe chucks.
Show series
Square actuation wrench

Square actuation wrench

Spanner wrench for manual actuation of the SCHUNK ROTA-S plus and ROTA-G manual lathe chucks.
Show series
Hexagon actuation wrench

Hexagon actuation wrench

Spanner wrench for manual actuation of the SCHUNK manual lathe chucks with hexagonal connections.
Show series
Wrench with pin and movable cross handle

Wrench with pin and movable cross handle

Actuation key with movable cross handle for actuation of SCHUNK ROTA-S plus and ROTA-G manual chucks. Excellently suitable if there is not much space for actuation.
Show series
Spanner wrench adapter

Spanner wrench adapter

Spanner wrench adapter as an attachment for torque wrench and wrenches for actuating SCHUNK manual lathe chucks.
Show series
Jaw change wrench

Jaw change wrench

Wrench for fast change of the jaws for power lathe chucks with jaw quick-change system.
Show series
Mounting wrench for turnable ring

Mounting wrench for turnable ring

Assembly key for easy assembly of SCHUNK power chucks on the lathe.
Show series
Adapter plate

Adapter plate

Standardized adapter plates for quick and easy mounting of ROTA-M flex 2+2 manual lathe chucks on VERO-S clamping stations.
Show series
Consol plate

Consol plate

Standardized base plates for fater and simple fastening of SCHUNK manual lathe chucks on mill/turn centers.
Show series
Console jaws

Console jaws

Base jaws for the conversion of ROTA-ML flex 2+2 toolholder into a "fixed jaw clamping vise". KONTEC top jaws can be used as top jaws.
Show series
Locking cover

Locking cover

For locking of a jaw pair to realize a two jaw clamping.
Show series
Chip protection

Chip protection

Chip protection for easily sticking onto the base jaws of SCHUNK manual lathe chucks.
Show series
Cover plate

Cover plate

Cover plate for covering fastening screws of the chuck body as well as the guideway extensions for ROTA-S flex manual lathe chucks.
Show series
Sealing plug

Sealing plug

Sealing plug for closing the chuck bore of SCHUNK manual and power lathe chucks.
Show series
Centering pins

Centering pins

Centering pins for precise alignment of SCHUNK ROTA-S flex manual lathe chucks on the machine table.
Show series
Inductive proximity switch

Inductive proximity switch

Inductive proximity switches for monitoring the current clamping state of SCHUNK ROTA TB2 power lathe chucks.
Show series
Pressure monitoring retrofit kit

Pressure monitoring retrofit kit

Retrofit kit for mechanical pressure monitoring for all ROTA TB2 lathe chucks with continuous rapid and clamping stroke.
Show series
Modifications ROTA NCO

Modifications ROTA NCO

Central lubrication, air control, and coolant supply as modifications for fast and easy retrofitting of SCHUNK ROTA NCO power lathe chucks.
Show series
Z-mount on short taper ISO 702-1

Z-mount on short taper ISO 702-1

Standardized flanges for adaptation of hydraulically actuated power lathe chucks with Z-mount to the machine spindle with short taper.
Show series
Z-mount on short taper ISO 702-1

Z-mount on short taper ISO 702-1

Standardized flanges for adaptation of pneumatically actuated power lathe chucks with Z-mount to the machine spindle with short taper.
Show series
Z-mount on camlock ISO 702-2

Z-mount on camlock ISO 702-2

Standardized flanges for adaptation of pneumatically actuated power lathe chucks with Z-mount to the machine spindle with camlock mount.
Show series
Z-mount on bayonet ISO 702-3

Z-mount on bayonet ISO 702-3

Standardized flanges for adaptation of pneumatically actuated power lathe chucks with Z-mount to the machine spindle with bayonet mount.
Show series
Z-mount on Z-mount

Z-mount on Z-mount

Standardized flanges for adaptation of hydraulically actuated power lathe chucks with Z-mount to the machine spindle with Z-mount.
Show series
Center sleeve closed

Center sleeve closed

Closed protection sleeves to protect the chuck kinematics against the penetration of chips and coolant.
Show series
Protection sleeve with ejector

Protection sleeve with ejector

Closed protection sleeves to protect the chuck kinematics against the penetration of chips and coolant Due to the integrated ejector, workpieces can be automatically ejected from the chuck.
Show series
Protection sleeve with spray nozzles

Protection sleeve with spray nozzles

Closed protection sleeve to protect the chuck kinematics against the penetration of chips and coolant By means of an integrated spray nozzle, the coolant can be affixed directly to the workpiece.
Show series
Center sleeve with adjustable stop

Center sleeve with adjustable stop

Closed protection sleeves to protect the chuck kinematics against the penetration of chips and coolant. Using the integrated stop, workpieces can be positioned with a high repeat accuracy in the chuck.
Show series
Expansion arbor for ROTA-S plus 2.0

Expansion arbor for ROTA-S plus 2.0

Segmented arbor or I.D. clamping in combination with 3-jaw manual chuck ROTA-S plus 2.0 in modified design. For use of vario M an additional cone must be ground on the chuck bore; has to be ordered separately.
Show series
Rollers

Rollers

There are 2 different rollers for all steady rests:
  • cylindrical version for upright steady rest
  • spherical version for traveling steady rest
  • Show series
    Roller fine adjustment

    Roller fine adjustment

    Eccentric roller pins on the steady rest arms allow quick fine adjustment of the center.
    Show series
    Stroke measuring system

    Stroke measuring system

    Enables a continuous position monitoring and a partial opening of the lever arms.
    Show series
    Monitoring unit

    Monitoring unit

    Monitoring units for detecting clamping positions "Opened", "Clamped" and also to some extent "Clamped without pin".
    Show series
    Indexing pin

    Indexing pin

    Indexing pins for position orientation of clamping pallets and clamping devices on VERO-S clamping devices.
    Show series
    Fitting screw

    Fitting screw

    Fitting screws for clamping pin mounting if these do not have any centering collar.
    Show series
    Adjustment screw

    Adjustment screw

    Compensation screw for minimum compensation of thread coax errors on workpieces.
    Show series
    Centering taper

    Centering taper

    Centering taper for retrofitting NSL3 turn or NSL turn clamping stations for highly precise centering of clamping pallets and for increasing the run-out accuracy.
    Show series
    Centering ring

    Centering ring

    Centering sleeve for retrofitting clamping pallets for highly precise centering on NSL3 turn or NSL turn clamping stations and increase in run-out accuracy.
    Show series
    Cone seal

    Cone seal

    Cone seal for quick and easy retrofitting of existing NSE3 modules without cone seal to protect the change interface.
    Show series
    Locking coupling

    Locking coupling

    Quick-change coupling for easy actuation of VERO-S clamping stations or module height extensions.
    Show series
    Connecting strip

    Connecting strip

    1-way strip for convenient actuation of VERO-S clamping stations.
    Show series
    Media transfer unit

    Media transfer unit

    Universally applicable Plug & Work media transfer unit as standard for all current VERO-S clamping stations.
    Show series
    Coupling strip

    Coupling strip

    Coupling strips for clamping stations and clamping pallets for transmitting the compressed air from the robot module to the clamping device.
    Show series
    Coupling nipple

    Coupling nipple

    Coupling nipple with media transfer unit for actuating clamping stations and clamping devices via the appropriate coupling strip.
    Show series
    Coupling

    Coupling

    Used as a counter piece in clamping pallets or devices for the transfer of compressed air or hydraulics.
    Show series
    Coupling set

    Coupling set

    Coupling set for connecting two NSL mini  100-2 clamping stations.
    Show series
    Cylindrical clamp blanks

    Cylindrical clamp blanks

    Cylindrical clamp blanks for customer rework, for individual fastening of VERO-S clamping stations on all common slot spacings of the machine tables.
    Show series
    Protection covers

    Protection covers

    Protective covers for sealing the changing interface and for covering the flat surfaces of VERO-S clamping modules.
    Show series
    Cover caps

    Cover caps

    Cover caps serve to cover the fastening screws and avoid the accumulation of chips.
    Show series
    Alignment element

    Alignment element

    Alignment element for basic module
    Show series
    Positioning mandrel

    Positioning mandrel

    Positioning arbor for exact positioning of base modules on the machine table using the machine spindle.
    Show series
    Basic height extension

    Basic height extension

    Height extension for basic module as a stable underframe for set-up of WDM-5X basic modules on T-slide table.
    Show series
    Sleeve

    Sleeve

    Serves as insert for basic modules WDP-5X-BM 99 or WDP-5X-BMR 99 for positioning on grid plates.
    Show series
    Clamping pin holder

    Clamping pin holder

    Clamping pin mountings for storing clamping devices as inserts in the inlay sheets of the VERO-S setup cart
    Show series
    Supporting Jaws

    Supporting Jaws

    Reversible supporting jaws with fine serration for mounting standard top jaws from SCHUNK.
    Show series
    3-Axis Jaw grip

    3-Axis Jaw grip

    Reversible 3-axis jaw with grip step on both sides as well as ground step.
    Show series
    5-Axis Jaw grip

    5-Axis Jaw grip

    Reversible 5-axis jaw with grip step on both sides as well as ground step.
    Show series
    Quick-change jaws

    Quick-change jaws

    Hardenable top jaw blanks with jaw quick-change interface BWA for reworking by the customer. These can be customized according to requirements.
    Show series
    Quick-change jaws

    Quick-change jaws

    Top jaw with mounting threads to accommodate clamping inserts or clamping bars with jaw quick-change interface BWA.
    Show series
    Claw jaws

    Claw jaws

    Claw jaws with fine serration for embossed clamping of cylindrical workpieces on 3-jaw clamping force blocks.
    Show series
    Top jaw blanks drilled

    Top jaw blanks drilled

    Top jaw blanks with tongue and groove and preassembled mounting holes for customer rework.
    Show series
    Top jaw blanks

    Top jaw blanks

    Top jaw blanks serve for customer rework and can be adjusted depending on the requirement.
    Show series
    Top Jaw Blanks with Mounting Groove

    Top Jaw Blanks with Mounting Groove

    Top jaw blanks with fine serration and preassembled mounting groove for customer rework.
    Show series
    Console plates

    Console plates

    For fastening clamping force blocks onto the machine table via VERO-S clamping pins or cylindrical clamps.
    Show series
    Gripper fingers

    Gripper fingers

    Gripper fingers specifically designed to clamp the WTR-A and WTG-A quick-change jaws.
    Show series
    Base Plate

    Base Plate

    Base plate for pneumatic TANDEM clamping force blocks with VERO-S interface
    Show series
    VERO-S retrofit kit

    VERO-S retrofit kit

    Retrofit kit for SCHUNK clamping devices for quick use on VERO-S quick-change pallet systems
    Show series
    T-nuts

    T-nuts

    For accurate positioning and mounting of manual clamping vises on the machine table.
    Show series
    Clamping screws

    Clamping screws

    Clamping screws for indirect fastening of SCHUNK clamping devices via clamping claws or directly through the base body.
    Show series
    Clamping claw

    Clamping claw

    Clamping claws for quick and easy mounting of SCHUNK clamping devices on the machine table.
    Show series
    Screws

    Screws

    For precise position orientation and mounting of manual clamping vises on the machine table.
    Show series
    Alignment and centering set

    Alignment and centering set

    Clamping and alignment sets for alignment and fastening of the clamping system on the machine table.
    Show series
    Consoles

    Consoles

    Console for lifting SCHUNK clamping devices from the machine table and for improving the accessibility of the machine spindle to the workpiece.
    Show series
    Assembly set

    Assembly set

    Assembly sets for simple and quick assembly of SCHUNK clamping devices on clamping pallets or consoles.
    Show series
    Cylinder pin set

    Cylinder pin set

    Cylinder pin set for quick and easy positioning of SCHUNK clamping devices on clamping pallets.
    Show series
    Clamping lever

    Clamping lever

    Clamping lever and clamping lever with joint for operating SCHUNK clamping devices.
    Show series
    Torque wrench

    Torque wrench

    Torque wrench for actuating manual clamping systems from SCHUNK.
    Show series
    Quick adjustment

    Quick adjustment

    For fast jaw and clamping range adjustment
    Show series
    Crank handle

    Crank handle

    For fast jaw and clamping range adjustment
    Show series
    Hexagonal insert

    Hexagonal insert

    Hexagonal inserts with hexagon socket or hexagon pin insert for the actuation of manual vises with the help of torque wrenches or clamping levers.
    Show series
    Clamping pin GFD

    Clamping pin GFD

    Set of clamping pins for positive locking of centric clamping vises for small components to the consoles with gauge dimensions 52 x 52 mm.
    Show series
    Hexagonal adapter

    Hexagonal adapter

    Hexagonal adapter for increasing the wrench size from A/F 12 to A/F 27.
    Show series
    Base body extension

    Base body extension

    For extension of the base body and therefore the extension of the clamping range for the KONTEC KSX 5-axis clamping vise.
    Show series
    Drawbar extension

    Drawbar extension

    Drawbar extensions for extending the clamping range of SCHUNK clamping devices.
    Show series
    Connecting element

    Connecting element

    For connecting two or more SCHUNK clamping rails
    Show series
    Spindle assembly group

    Spindle assembly group

    Spindle assembly group fast and easy exchange of already existing spindles.
    Show series
    Spindle nut

    Spindle nut

    Spindle nut for the movable jaw for fast and easy exchange of already existing spindle nuts.
    Show series
    Force box

    Force box

    Mechanical force box for quick and easy replacement of force boxes that are already present.
    Show series
    Handles

    Handles

    Handles for easier handling of SCHUNK clamping devices.
    Show series
    Cover plate

    Cover plate

    Cover plates to prevent accumulation of chips within the clamping device.
    Show series
    Workpiece stop

    Workpiece stop

    Workpiece stops for quick positioning of workpieces on SCHUNK clamping devices.
    Show series
    Workpiece support

    Workpiece support

    Hardened and ground workpiece supports for placing workpieces. Workpiece supports can be quickly and easily fastened on SCHUNK clamping devices.
    Show series
    Workpiece Supports Set

    Workpiece Supports Set

    Hardened and ground workpiece supports for placing workpieces. Workpiece supports can be quickly and easily fastened on SCHUNK clamping devices.
    Show series
    Reversal jaws

    Reversal jaws

    Due to the different clamping areas, the vises can be quickly and easily adjusted with reversible jaws to the customized clamping tasks.
    Show series
    Reversal jaws grip

    Reversal jaws grip

    Due to the different clamping areas, the vises can be quickly and easily adjusted with reversible jaws to the customized clamping tasks. The additional grip stages is used for better hold of the workpiece during machining.
    Show series
    Quick-change jaws

    Quick-change jaws

    The quick-change jaws can be replaced in a very short time. This means that the clamping device can be adapted to the customized clamping task in a matter of seconds.
    Show series
    Swivel plates

    Swivel plates

    Adapter pates serve, combined with pendulum plates for clamping bulky workpieces.
    Show series
    Adapter plates

    Adapter plates

    Adapter plates serve, combined with pendulum plates for clamping bulky workpieces.
    Show series
    Aluminum jaws

    Aluminum jaws

    Aluminum jaws serve for customer rework and can be adjusted depending on the requirement
    Show series
    Steel jaws

    Steel jaws

    Steel jaws serve for customer rework and can be adjusted depending on the requirement.
    Show series
    Combi jaws

    Combi jaws

    Combi jaws are used due to the two different clamping areas for fast and easy adjustment to the customized clamping tasks.
    Show series
    6-way jaw system

    6-way jaw system

    6x jaw system for clamping the workpiece from six sides and thereby significantly increased holding force.
    Show series
    5-axis jaws

    5-axis jaws

    5-axis jaws for improved accessibility of the machine spindle or the tool to the workpiece.
    Show series
    Central jaws

    Central jaws

    Central jaws, combined with the movable jaws, are used for double clamping vises as fixed jaws in the middle.
    Show series
    Prism jaws

    Prism jaws

    Prism jaws are used for clamping round or bulky workpieces.
    Show series
    Precision jaws

    Precision jaws

    Precision jaws for a higher squareness of the workpieces.
    Show series
    Wedge Clamping Elements

    Wedge Clamping Elements

    Wedge clamping elements are used to clamp a number of small workpieces in confined spaces.
    Show series
    Adjustable jaws

    Adjustable jaws

    Adjustable jaws are used on KSM2 clamping rails for mounting clamping inserts and at the same time are used as fixed jaws for the next workpiece.
    Show series
    VS jaws

    VS jaws

    VS jaws with enlarged clamping range and increased accessibility of the machine spindle or the tool to the workpiece.
    Show series
    Soft jaw

    Soft jaw

    Hardenable jaws for rework at the customer site, e.g. for incorporating contours or special shapes.
    Show series
    Ground jaw

    Ground jaw

    With a completely ground clamping face.
    Show series
    Smooth jaw

    Smooth jaw

    Horizontally insertable jaw with enlarged clamping range and ground step.
    Show series
    Coated jaw

    Coated jaw

    For increasing the friction between jaw and workpiece.
    Show series
    Grip jaw

    Grip jaw

    For embossing clamping of workpieces.
    Show series
    Serrated jaw

    Serrated jaw

    For increasing the friction between jaw and workpiece with minimal clamping impressions.
    Show series
    Universal stepped jaw

    Universal stepped jaw

    Versatile stepped jaw with ground step.
    Show series
    Jaw profiled

    Jaw profiled

    For increasing the friction between jaw and workpiece without clamping impressions.
    Show series
    Prism jaws

    Prism jaws

    For precise clamping of round workpieces.
    Show series
    Chuck jaw with locating pins

    Chuck jaw with locating pins

    Retractable locating pins for quickly adjusting the jaw to the respective workpiece.
    Show series
    Spring leaf pull-down jaw

    Spring leaf pull-down jaw

    For an active jaw pull-down function with a light clamping impression on the workpiece for more precise machining results.
    Show series
    Spring plate pull-down jaw

    Spring plate pull-down jaw

    For an active jaw pull-down function without clamping impressions on the workpiece for more precise machining results.
    Show series
    Intermediate jaw with spring plate

    Intermediate jaw with spring plate

    The intermediate jaw is used to retrofit KSG vises in order to increase the number of workpieces.
    Show series
    Plate spring for pull-down jaw

    Plate spring for pull-down jaw

    Spring leaf available as an accessory for the spring leaf of the pull-down jaw for raw part clamping with pull-down function.
    Show series
    Pull-down jaw

    Pull-down jaw

    For an active jaw pull-down function without clamping impressions on the workpiece for more precise machining results.
    Show series
    Positioning bar

    Positioning bar

    Positioning bar for stepped grip jaw with T-Nut
    Show series
    6-way reversal jaws

    6-way reversal jaws

    Reversal jaw with six different clamping contours for flexible clamping of a great variety of workpieces.
    Show series
    Pull-down jaw

    Pull-down jaw

    Clamping insert for adjustable jaws with serrated clamping surface and pull-down effect.
    Show series
    Parallel jaw

    Parallel jaw

    Clamping inserts for adjustable jaws.
    Show series
    Pendulum jaws

    Pendulum jaws

    Clamping insert for adjustable jaws with serrated clamping surfaces and pendulum mechanism for compensating minor workpiece unevenness.
    Show series
    Clamping wedge

    Clamping wedge

    Clamping insert for adjustable jaws for mounting soft chuck jaws.
    Show series
    Set of set-up screws

    Set of set-up screws

    For fastening of MFRS magnetic chucks on the machine table.
    Show series
    Clamping claws

    Clamping claws

    Clamping claws for quick and easy fastening of magnetic chucks on the machine table
    Show series
    Flexible pole extensions

    Flexible pole extensions

    Flexible pole extensions in a square design, which are applied to the workpiece.
    Show series
    Flexible pole extensions

    Flexible pole extensions

    Flexible pole extensions in a square design, which are applied to the workpiece.
    Show series
    Fixed pole extensions

    Fixed pole extensions

    Fixed pole extensions in square design
    Show series
    Pole extension quick change

    Pole extension quick change

    Pole extension quick change for increased flexibility in production through fast and tool-free positioning of the pole extensions.
    Show series
    Pole block

    Pole block

    MAGNOS pole blocks are used for ensuring that the customer can mill the contours and special shapes (workpiece negatives) by himself.
    Show series
    Pole Plates

    Pole Plates

    MAGNOS pole plates are used for ensuring that the customer can mill the contours and special shapes (workpiece negatives).
    Show series
    Laminated block

    Laminated block

    MAGNOS pole blocks are used for ensuring that the customer can mill the contours and special shapes (workpiece negatives) by himself.
    Show series
    Pole plates

    Pole plates

    MAGNOS pole plates are used for ensuring that the customer can mill the contours and special shapes (workpiece negatives).
    Show series
    Connection Cable

    Connection Cable

    Connection cable for installation between control unit KEH plus and magnetic chuck
    Show series
    Junction box

    Junction box

    To install between control unit KEH and magnetic chuck
    Show series
    PLC cable

    PLC cable

    PLC cable for connection between control unit KEH plus and PLC box
    Show series
    PLC box

    PLC box

    PLC box for installation between KEH plus control unit and PLC machine for automation
    Show series
    Hand-held remote control

    Hand-held remote control

    The hand remote controls HABE KEH plus are used to control magnetic chucks.
    Show series
    KEH P control unit

    KEH P control unit

    The control units KEH P are used to control MSC magnetic chucks
    Show series
    Control unit

    Control unit

    The MAGNOS control units activate and deactivate the magnetic chucks. A specially sealed quick-release connector connects the unit and the magnetic chuck. The control units are fitted with a manual controller as standard, and an industrial remote control is available on request.
    Show series
    Workpiece stop

    Workpiece stop

    Workpiece stop for MAGNOS magnetic chucks MFR and MFRS
    Show series
    Manual gaussmeter

    Manual gaussmeter

    Manual gaussmeter for quickly checking residual magnetism in workpieces after machining by magnetic chucks
    Show series
    Docking station

    Docking station

    Docking station for the connection cable between the control unit and magnetic chuck. With additional safety device via an inductive sensor that checks whether the connector is in the docking station.
    Show series
    Protection cover

    Protection cover

    Cover for MFRS magnetic chucks for additional mechanical protection against chips.
    Show series
    Clamping claw

    Clamping claw

    Clamping claws for quick and easy mounting of SCHUNK matrix plates on the machine table.
    Show series
    Support plate

    Support plate

    Support plates used as intermediate plates for machining workpieces with suction cups or new FlexMat.
    Show series
    Suction cup

    Suction cup

    Suction cups for 5-sided workpiece machining and production of cut-outs.
    Show series
    Elastomer Mat

    Elastomer Mat

    Elastomer mat specially developed for production of recesses and complex parts.
    Show series
    Vacuum connection set

    Vacuum connection set

    Connection set with manual slide valve for optimal vacuum supply.
    Show series
    Plug connector

    Plug connector

    Connecting link between matrix plates and connection kits.
    Show series
    Manual slide valve

    Manual slide valve

    Replacement valve for the vacuum connection sets.
    Show series
    Pressure gauge set

    Pressure gauge set

    Pressure gauge for continuous vacuum monitoring on the workpiece
    Show series
    Vacuum distributors

    Vacuum distributors

    Vacuum connection set for monitoring and distributing compressed air as well as for easy activation of the vacuum and ventilation of the clamping system.
    Show series
    Vacuum hose

    Vacuum hose

    Connecting hoses as connecting elements between matrix plates and aggregate, connection kits and matrix plates and matrix plates to pressure gauges.
    Show series
    Hose nozzle

    Hose nozzle

    Connection piece between connection set and vacuum hose.
    Show series
    Hose clamp

    Hose clamp

    Hose clamps for safely mounting the vacuum hose to the hose clip.
    Show series
    Workpiece stop

    Workpiece stop

    Stop with set-screw and knurled nut.
    Show series
    Friction island

    Friction island

    Friction island to increase shear force absorption by up to 30%.
    Show series
    Hose bracket

    Hose bracket

    Magnetic hose holders for safe guidance of hoses.
    Show series
    Blind plugs

    Blind plugs

    Blind plug for screw connection or dummy cover of unused plug-in connection on the vacuum connection kit.
    Show series
    Closing screw

    Closing screw

    Locking screws for screw connection or dummy cover for unused plug connections on the vacuum connection kit.
    Show series
    Closing magnets

    Closing magnets

    Closing magnets for closing unused connection bore holes on the support plates in combination with suction cups.
    Show series
    Caulking strip

    Caulking strip

    Caulking strips for sealing the clamping surface by pushing caulking strip into the corresponding matrix plate grid.
    Show series
    Sealing frame

    Sealing frame

    Replacement seals for the corresponding suction cups regardless of height.
    Show series
    V-rings

    V-rings

    Sealing ring for SCMB-HD vacuum block.
    Show series
    Spare parts package

    Spare parts package

    Spare parts kit for workpiece stops.
    Show series
    Cover

    Cover

    Cover on base jaws to effectively prevent the leakage of grease.
    Show series
    Scraper strip, left

    Scraper strip, left

    Wiper bar for sealing the base jaw on the chuck face.
    Show series
    Scraper strip, right

    Scraper strip, right

    Wiper bar for sealing the base jaw on the chuck face.
    Show series
    Indicator pin

    Indicator pin

    Indicator pin for indicating the clamping status on ROTA-S plus 2.0 and ROTA-S plus manual lathe chucks.
    Show series
    Release bolt complete

    Release bolt complete

    Release bolt for initiating the rotary movement of the jaw quick-change key for jaw change on ROTA  THW  plus power lathe chucks with jaw quick-change.
    Show series
    Sealing disk

    Sealing disk

    Internal sealing disk for sealing the piston chamber to the chuck kinematics in pneumatic power lathe chucks.
    Show series
    Pressure bolt

    Pressure bolt

    Pressure bolt for actuating the jaw release mechanism on ROTA-S plus 2.0 manual chucks.
    Show series
    Eccentric bolt complete

    Eccentric bolt complete

    Eccentric bolt for transferring the rotary movement of the jaw-change bolt to the jaw release on ROTA  THW  plus power lathe chucks with quick jaw-change.
    Show series
    Filling plug

    Filling plug

    Filling plug as a spare part for the pressure maintenance valve on pneumatic power lathe chucks.
    Show series
    Base jaw

    Base jaw

    Base jaws for power chucks either with tongue and groove, imperial or metric fine serration.
    Show series
    Clamping ring

    Clamping ring

    Retainer ring for mounting the center sleeve.
    Show series
    Cover

    Cover

    Cover for ROTA NCR-A chuck.
    Show series
    Lever

    Lever

    Lever for transferring the axial force of the chuck piston into a radial jaw movement of the base jaws on ROTA NCR and ROTA NCR-A compensation chucks.
    Show series
    Sleeve

    Sleeve

    Sleeves or inlays to further increase the tightness and rigidity of the chuck in the area of the mounting screws.
    Show series
    Wedge bar without thread

    Wedge bar without thread

    Wedge bars without thread for transmitting the torque of the drive ring on ROTA-S  plus  2.0 and ROTA-S  plus manual lathe chucks to the base jaws.
    Show series
    Wedge bar with thread

    Wedge bar with thread

    Wedge bar with thread for transmitting the torque of the actuation spindle on ROTA-S  plus  2.0 and ROTA-S  plus manual lathe chucks to the drive ring and the base jaw.
    Show series
    Wedge bar

    Wedge bar

    Complete wedge bars for 1:1 replacement on ROTA-S plus manual lathe chucks or ROTA THW plus power lathe chucks.
    Show series
    Piston cover

    Piston cover

    Piston cover for the integrated pneumatic cylinders on pneumatic power lathe chucks.
    Show series
    Piston

    Piston

    Chuck piston for transmitting the axial force from the hydraulic cylinder to the base jaws, thereby generating a radial jaw movement.
    Show series
    Connecting member

    Connecting member

    Connecting member serving as connecting piece between pendulum body and angle lever on ROTA  NCR compensation chucks.
    Show series
    Seat of bearing

    Seat of bearing

    Seat of bearing for supporting the angle lever on ROTA NCR and ROTA NCR-A compensation chucks.
    Show series
    Seat of bearing

    Seat of bearing

    Seats of bearing for supporting the drive spindle on ROTA-S plus manual lathe chucks.
    Show series
    Cartridge, complete

    Cartridge, complete

    Complete cartridge for actuating the jaw release mechanism on ROTA-S plus 2.0 manual lathe chucks.
    Show series
    Locking of the pendulum mechanism

    Locking of the pendulum mechanism

    Pendulum lock for locking the balancing mechanism on 6-jaw power chucks.
    Show series
    Pendulum body

    Pendulum body

    Pendulum bodies for mechanical connection of the base jaw pairs on ROTA NCR and ROTA NCR-A power lathe chucks.
    Show series
    Plunger pin, complete

    Plunger pin, complete

    Plunger pin for pre-positioning the base jaws on ROTA-S  plus and ROTA  THW  plus chucks with jaw quick-change.
    Show series
    check valve

    check valve

    Check valve for maintaining pressure on pneumatic power lathe chucks during machining.
    Show series
    Lubricating nipple

    Lubricating nipple

    Lubrication nipple for quick and easy lubrication of SCHUNK lathe chucks.
    Show series
    Center sleeve

    Center sleeve

    Center sleeves for protecting the chuck kinematics against the penetration of chips and coolant.
    Show series
    Distributor ring

    Distributor ring

    Distributor rings for transmitting compressed air into pneumatic power chucks when at a standstill.
    Show series
    Safety bolt

    Safety bolt

    Safety bolt for checking the presence of the base jaws on ROTA-S  plus manual chucks, without which actuation is not possible.
    Show series
    Spindle, complete

    Spindle, complete

    Thread spindles for operating ROTA-S plus 2.0 and ROTA S plus manual lathe chucks.
    Show series
    Drive ring

    Drive ring

    Drive ring for transmitting the applied force of the thread spindle to the base jaws on manual lathe chucks.
    Show series
    Cover plate

    Cover plate

    Cover plate to protect the underlying chuck and pendulum kinematics on ROTA NCR and ROTA NCR-A pendulum compensation chucks.
    Show series
    Wearing parts set

    Wearing parts set

    Wearing parts kit with all the typical wearing parts for performing the prescribed maintenance.
    Show series
    Closing screw

    Closing screw

    Locking screws for closing different bore holes on power lathe chucks.
    Show series
    Blank draw nut

    Blank draw nut

    Blank draw nuts for rework by the customer to be used for connecting power lathe chuck and drawbar/draw tube.
    Show series
    Intermediate stop

    Intermediate stop

    Base jaw intermediate stop for power chucks with a complete hood over the chuck face as a cover.
    Show series
    Clamping pins for NSR maxi

    Clamping pins for NSR maxi

    Clamping pins with short taper for form-fit connection of pallet coupling and robot module.
    Show series
    Clamping pin extensions

    Clamping pin extensions

    Clamping pin extensions to increase the clamping height of the workpiece and reduce the interfering contour.
    Show series