SCHUNK original accessories enhance the versatility and the field of application of our standard modules for your application. Optimum functionality, reliability, and precise positioning are ensured by SCHUNK original accessories. Experience highest quality and utmost longevity.
Standardized adapter plates for SCHUNK quick-change systems SWS for use with the storage system SWM-B – without mechanical processing, directly from the modular system.
Optional mounting plate for mounting and centering the SWM-B. The plate enables repeatable positioning and thus easy exchange of the storage modules SWM-B 050, SWM-B 050-V and SWM-B 085. The mounting plate universal additionally enables screw connections to vertical aluminum profiles as well as the use of the SWM-B 085-V.
Storage pin incl. thrust washer for mounting to a quick-change adapter via an adapter plate. In the standard adapter plates for the SWM-B, the pin and thrust washer are already included in the scope of delivery.
Anti-rotation protection for the active variant of the SWM-B -V storage system for mounting to a quick-change adapter via an adapter plate. In the standard adapter plates for the SWM-B -V, the anti-rotation proetection is already included in the scope of delivery.
The automated media changer consists of a media feeder, a media changer and a media checker. The three components can be freely positioned and are necessary for the automatic change of the pads.
Centering sleeves are used for centering between two elements. With SCHUNK grippers, this frequently occurs between the mounting plate and gripper and between the gripper and gripper fingers.
In case of pressure failure, venting of the module will be prevented by the pressure maintenance valve. Therefore a temporary force or position maintenance can be implemented via different actuators. This is particularly suitable for grippers which cannot be equipped with a mechanical gripping force maintenance.
Connection cables and connection cable kits for electrical connection to specific robot models and controllers. Depending on the manufacturer, a direct connection to the tool flange is possible or external cabling is required. In combination with mechanical adapters and software modules, this allows commissioning on the robot to be carried out in just a few steps.
Spare parts packages contain all required parts for repair and maintenance. There are three different spare parts kits for the product OSE available: seal kit, shock absorber, and cover.
Spare parts kits contain all the parts required for repair and maintenance. Four different spare parts kits for the SRM product are available: the shock absorber, the seal kit for media feed-through, the sealing kit for the center position and the sealing kit.
