arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
CELSIO CF HSK-A 63 Ø25x115 Abbildung ähnlich

CELSIO CF HSK-A 63 Ø25x115

Warmschrumpffutter

Ident.-Nr. 26001827

Lieferzeit auf Anfrage
CELSIO CF HSK-A 63 Ø25x115, Werkzeughalter
  • Warmschrumpffutter
  • Baureihe: CELSIO
  • Cool Flow Variante
  • Werkzeughalterschnittstelle: HSK-A 63
  • Spanndurchmesser: 25 mm
  • Auskraglänge: 115 mm
  • Rundlaufgenauigkeit: ≤ 0,003 mm gemessen in der Spannbohrung (nach DIN 69882-8)
  • Wuchtgüte: G2,5 bei 25.000 1/min oder Umax < 1 gmm
  • Min. Drehmoment: 680 Nm
Technology Heat shrinking toolholder
Series CELSIO
Toolholder interface HSK-A 63
Toolholder standard DIN ISO 12164-1
Clamping diameter D1 25 mm
D2 [mm] 53.0
D6 [mm] 44.0
Projecting length L1 [mm]/[inch] 115 mm / 4.5"
L2 [mm] 59.0
L3 [mm] 10.0
L4 [mm] 89.0
G M16x1
Min. torque [Nm] 680.0
Weight [kg] 1.75
Cool Flow variant yes
Standard length yes

Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Tool shank quality
h6

Data carriers
Bore holes for data carriers according to DIN 69873

Toolholder changes
For automatic toolholder changes

Coolant supply
Cool Flow version
Coolant is fed via two coolant bore holes directly to the cutting edge of the tool

Length-setting screw
With adjustment screw for axial length adjustment (except Ø 3, Ø 4 and Ø 5)

Balancing screw
With thread for balancing screws (except Ø 3, Ø 4 and Ø 5)

Individual
Additional sizes and customized designs are available upon request