arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitter userwarning wechat xing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.


5-axis vise
5-axis vise with adjustable clamping center, largest basic clamping stroke and active jaw pull-down function for the complete and precise machining of the sixth side.

Advantages – Your benefits

  • Active jaw pull-down
    Optionally allows complete and precise machining of the sixth side
  • Jaw quick-change without tools
    Adjustment to new clamping tasks within seconds
  • Adjustable clamping center
  • Long basic clamping stroke with 130 mm
    Small and large workpieces are always clamped centrically
  • Extendable clamping range
    Wide range of applications without additional extensions
  • Optimum accessibility
    Enables the clamping of workpieces of various lengths
  • Integrated elastomer damping
    Allows the workpiece to be machined from five sides
  • Wide range of applications
    To minimize vibrations during machining
  • Wide jaw program
    Suitable for rough and finished parts machining
  • Clamping by tension
    Optimum adjustment to new clamping tasks
  • VERO-S interface
    No bending of the base body

Options and special information

  • The 5-axis vise for 6-sided machining
    The single-acting vise KONTEC KSX-C2 combines several unparalleled features for 5-axis machining. An adjustable clamping center, optimum accessibility to the workpiece and the basic clamping stroke of 130 mm make the KSX-C2 an incredibly versatile clamping device. The absolute highlight is the active pull-down function of the vise integrated by default. This is done by locking the second jaw and allows a complete and precise machining of the sixth side without conversion to other dimensions.
  • A new jaw quick-change system enables the exchange of a large number of system jaws with each other within a few seconds and completely without tools. In combination with drawbar extensions, the KSX-C2 can be quickly and easily adapted to any new requirement. Due to the integrated VERO-S interface, clamping pins can be directly screwed into the base body, and the 5-axis vise can be located on the quick-change pallet system.