arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
WELDON Slim

WELDON Slim

WELDON end mill holders
WELDON Slim end mill holders can be used to reliably clamp tools with a lateral clamping face on the cylindrical shank. Due to the toolholder′s clamping screw, the tool cannot be turned or pulled out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835B and DIN 6535HB. Clamping screw with ball head and length adjustment screw are included in the scope of delivery.
The WELDON Slim Cool Flow variant enables peripheral cooling by means of cooling channels in the wall, which can be optionally closed/sealed again with two M3 screws. The coolant is fed directly to the cutting edge of the tool.
Toolholder interface
Projecting length L1 [mm]
All filters
8 results
23000633
HSK-A 63 
6 mm 
100 mm / 3.9" 
23000634
HSK-A 63 
8 mm 
100 mm / 3.9" 
23000635
HSK-A 63 
10 mm 
100 mm / 3.9" 
23005000
HSK-A 63 
12 mm 
100 mm / 3.9" 
23005058
SK 40 
6 mm 
100 mm / 3.9" 
23005059
SK 40 
8 mm 
100 mm / 3.9" 
23005060
SK 40 
10 mm 
100 mm / 3.9" 
23004020
SK 40 
12 mm 
100 mm / 3.9"