BSWS-M-PGZN-plus
Sistema de cambio rápido de garras
El sistema de cambio rápido de mordazas BSWS-M sin herramienta hace posible el cambio rápido y manual de las mordazas superiores en el gripper. Se requieren dos pasadores adaptadores (= un juego BSWS-A) y una base (BSWS-BM) para cada mordaza de pinza. En caso de montaje inverso y siempre que no se cree una altura adicional, se requieren dos pasadores adaptadores (= un juego BSWS-AR) y un kit de montaje (BSWS-URM) por mordaza. Con el BSWS-URM se eliminan también los barrenos de montaje problemáticos en el contorno del dedo.
Description
Advantages – Your benefits
- Universal application possibilities
By using the BSWS-M, just one single gripper is necessary for various applications - Tool-free jaw change via the unlocking button
easy and fast for a high gripper flexibility - Saving time when converting applications
Different workpieces can be handled by exchanging the gripper fingers
Options and special information
- BSWS-BM with adapter pin BSWS-A
System consisting of base and adapter pin. - BSWS-ABRM with adapter pin BSWS-AR
System consisting of top jaw blank with integrated jaw quick-change system and adapter pin. If the additional attachment height of the BSWS system with base should have a negative impact, it is possible to fasten the BSWS adapter pins BSWS-AR in the base jaws of the gripper with screws. Then the changing system is more compact in height. The locking mechanism will be integrated into the top jaw. As an additional effect, there are no more disturbing mounting holes in the finger contours. - BSWS-URM with adapter pin BSWS-AR
System consisting of individual components of the locking mechanism and adapter pin. If the additional installation height provided by the BSWS system with base is unfavorable and the finger contour cannot be produced from the BSWS-ABRM finger blank, it is possible to purchase the BSWS-ABRM locking mechanism separately and to integrate it with the customer's own finger constructions. - BSWS-AR
For the "SD" (dustproof) gripper variant, the supplied screws are too short. Therefore longer screws must be used. These are not included in the scope of delivery. - Food-grade lubrication
The product contains food-compliant lubricants as standard. The requirements of EN 1672-2:2020 are not fully met. The relevant NSF certificates are available at https://info.nsf.org/USDA/Listings.asp using the lubricant information in the operating manual.