KSP3-F 250-Z-PM
Pneumatische 2-Backen-Kraftspannblöcke
ID 1433823
Pneumatischer Kraftspannblock Standard
Produktmerkmale:
Produktmerkmale:
- 2-Backen-Kraftspannblock
- Mit fester Backe
- Standard Hub
- Koordinatengefertigte Absteckbohrungen
- Pneumatische Endlagenkontrolle
- Pneumatische Anlagekontrolle
- Grundbacken: Spitzverzahnung und Kreuzversatz
- Abmessungen: 250 x 250 x 98,2 mm
- Spannkraft bei max. Betriebsdruck: 55 kN
- Hub pro Backe: 10 mm
- Max. Backenhöhe: 150 mm
- Wiederholgenauigkeit: 0.01 mm
- Betriebsdruck: 2 - 6 bar
- Luftverbrauch pro Doppelhub bei 6 bar: 9100 cm³
- Schließ-/Öffnungszeit: 1.6 s
- Gewicht: 32 kg
技術的詳細
| Stroke per jaw [mm] | 10.0 |
|---|---|
| Clamping force at max. operating pressure [kN] | 55.0 |
| Min. operating pressure [bar] | 2.0 |
| Max. operating pressure [bar] | 6.0 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 150.0 |
| Distance H [mm] | 40.0 |
| Air consumption per double stroke at 6 bar [cm³] | 9100.0 |
| Closing/opening time [s] | 1.6 |
| Weight [kg] | 32.0 |
Scope of delivery
Clamping force block, fastening screws, cover plugs, clamping sleeves, fitting screws, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)