KSF3-LH 64-Z
ID 1518532
产品特性：
- 二爪动力虎钳
- 中心夹紧
- 大行程
- 夹具打磨定位孔
- 基爪: 细齿和榫槽
- 尺寸: 64 x 64 x 55,7 mm
- 夹持力范围: 1 - 1.5 kN
- 增压功能下的夹持力范围: 2.5 - 3 kN
- 单指行程: 4 mm
- 最大卡爪高度: 120 mm
- 重复精度: 0.01 mm
- 打开压力: 6 - 9 bar
- 最大增压: 6 bar
- 每个行程的耗气量: 110 cm³
- 闭合/张开时间: 0.1 s
- 重量: 1.5 kg
技术细节
| Stroke per jaw [mm] | 4.0 |
|---|---|
| Min. clamping force [kN] | 1.0 |
| Max. clamping force [kN] | 1.5 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 120.0 |
| Distance H [mm] | 10.0 |
| Air consumption per stroke at 6 bar [cm³] | 110.0 |
| Closing/opening time [s] | 0.1 |
| Weight [kg] | 1.5 |
Scope of delivery
Clamping force block, fastening screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Clamping force range
The clamping force depends on the stroke due to the spring tension. Max. clamping force is reached in the "open" condition, min. clamping force in the "closed" condition.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)