arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
IN 80-S-M12 Abbildung ähnlich

IN 80-S-M12

Induktive Näherungsschalter

ID 301578

Induktiver Näherungsschalter IN

  • Anzahl Schaltpunkte: 1
  • Schaltabstand: 1.5 mm
  • Zylindrischer Sensor
  • Gewinde Sensor: M8x1
  • Schaltart: PNP
  • Schließer
  • Kabellänge: 30 cm
  • Elektrischer Anschluss: M12
  • Nennspannung: 24 V
Messprinzip induktiv
Schaltfunktion Schließer
Schaltungsart PNP
Anzahl Schaltpunkte 1
Schaltabstand [mm] 1.5
Schalthysterese vom Nennschaltabstand < 15%
Max. Schaltfrequenz [Hz] 1000.0
Min. Umgebungstemperatur [°C] -25.0
Max. Umgebungstemperatur [°C] 70.0
LED-Anzeige am Sensor ja
Spannungsart DC
Nennspannung 24.0
Min. Betriebsspannung 10.0
Max. Betriebsspannung 30.0
Spannungsabfall [V] 1.5
Max. Schaltstrom 0.2
Kurzschlussschutz ja
Verpolungssicher ja
Werkstoff Gehäuse Edelstahl
Kabelstecker/Kabelende M12
Kabellänge L [cm] 30.0
Kabeldurchmesser D [mm] 3.3
Kabelaufbau (Aderquerschnitt/Anzahl Adern) 3x 0,14mm2
Werkstoff Kabelummantelung PUR
Min. Biegeradius (dynamisch) [mm] 33.0
Min. Biegeradius (statisch) [mm] 16.5
Eigenmasse [kg] 0.03
Schutzart IP (Sensor, gesteckt) 67
Schutzklasse II
Bohremulsionsresistenz * ja
*Getestete Bohremulsionen: r.rhenus TU 43P, Motorex Swisscool Magnum UX 550 und Oemeta 760 (1008339).

General notes about the series

SCHUNK gripping modules, rotary and linear modules, as well as robot accessories should be monitored with the suitable sensors from SCHUNK, since everything is adjusted to each other.

If the key characteristics such as switching distance, switching function, hysteresis, and voltage are sufficiently similar, proximity switches from other manufacturers can generally be used instead of the inductive proximity switches (IN, INK) from SCHUNK.

Sensors of other manufacturers which are integrated into SCHUNK products, seldom provide excellent switching results. Moreover, we cannot ensure proper function or functional safety of them.